- Covers 50-70 HP, 4-Stroke
- 1995-2001
- Shop Manual
________________________________________________________________________________________
- Covers 2 - 70 HP, 2-Stroke
- 1995-2007
- Shop Manual
________________________________________________________________________________________
- Covers all 1 - 50 Hp, 1 and 2-cylinder, 2-stroke Models.
- 1990-1995
- Repair Manual
________________________________________________________________________________________
- Covers all inline engines 2-70 Hp, 2 and 4-Stroke Models. Includes Fuel Injection and Jet Drives.
- 1990-2001
- Repair Manual
________________________________________________________________________________________
________________________________________________________________________________________
18-3104-1 Impeller
Note: 40 HP Commercial 1991-2001 (RS Models Only)
________________________________________________________________________________________
18-3127 Sierra Impeller Plate
________________________________________________________________________________________
18-3394 Water Pump Repair Kit - without housing
- Sierra Water Pump Kit Without Housing
- Contains 18-2705 Oil Seal, 18-2708 Grommet, 18-2709 Wear Plate Gasket, 18-3104 Impeller, 18-3126 Wear Plate, 18-3133 Bolts, 18-3138 Impeller Key, 18-3139 Impeller Plate, 18-7481 O-Ring
- Sierra part number: 18-3394
- Interchangeable with the following: Evinrude/Johnson 0433548, 0433549, 0438592, Mallory 9-48209
________________________________________________________________________________________
18-3454 Water Pump Kit - With Housing
- For 40, 50, 25 Jet, 30 Jet (1995-up)
- Contains 18-3104-1 Impeller
________________________________________________________________________________________
389145 Chrome Water Pump Kit
________________________________________________________________________________________
438544 Water Pump Impeller Housing
________________________________________________________________________________________
18-1351 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1351
- Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407
________________________________________________________________________________________
18-1354 Needle Bearing
- Sierra Needle Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1354
- Interchangeable with the following: GLM 22890, Evinrude/Johnson 386764
________________________________________________________________________________________
18-1355 Aft Outside Carrier Needle Bearing
GLM Part Number: 22900; Sierra Part Number: 18-1355; OMC Part Number: 386765
________________________________________________________________________________________
________________________________________________________________________________________
18-1363 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1363
- Interchangeable with the following: GLM 16350, Evinrude/Johnson 397537, OMC 979771
________________________________________________________________________________________
18-1364 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1364
- Interchangeable with the following: GLM 16360, Evinrude/Johnson 397538
________________________________________________________________________________________
18-1368 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1368
- Interchangeable with the following: GLM 16370, Evinrude/Johnson 398901
________________________________________________________________________________________
18-1369 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1369
- Interchangeable with the following: GLM 22940, Evinrude/Johnson 432264
________________________________________________________________________________________
18-1729 Cover and Bushing Assembly
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
18-2310 Forward Gear Set
Includes Forward and Pinion Gears
________________________________________________________________________________________
18-2315 Gear Set
Gear Set Contents:
________________________________________________________________________________________
________________________________________________________________________________________
18-3716 Marine Prop Nut Kit
Prop Kit Contents:
- Part # O.E.# Description
- 18-3705 314503 Prop Nut
- 18-3742 314502 Cotter Pin
- 18-4228 315810 Prop Spacer
________________________________________________________________________________________
18-3742 Marine Cotter Pin
- Sierra Cotter Pin
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3742-9
- Interchangeable with the following: GLM 22120, Evinrude/Johnson 314502, OMC 314502
- Size: 1/8 x 1-1/4"
________________________________________________________________________________________
18-4230 Marine Thrust Washer
________________________________________________________________________________________
18-4232 Marine Prop Spacer
________________________________________________________________________________________
For Evinrude Johnson OMC BRP, 13 Tooth Spline
- 40-75 HP (Small Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 3-3/8 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
-
- 40 HP, 2 Cyl, 1984 - 2005
- 48 HP, 1987-1996
- 50 HP, 2 Cyl, 1975 - 2005
- 55 HP, 2 Cyl, 1976-1979
- 60 HP 2 Cyl, 1980-1985
- 65 HP, 2 Cyl, 1980-1985
- 75 HP, 3 Cyl, 1975-1985
- Sprint/Formula E 1986-1992
Sorted by Pitch.
Pitch is how far, in inches, the boat would travel with 1 prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
OMC and Michigan Aluminum Propellers
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
9 |
BRP 776807 |
Amazon |
eBay |
Hydrus Pontoon Boats |
11 |
BRP 763488 |
Amazon |
eBay |
Cruisers and House Boats |
11 |
OEM 386907
|
Amazon |
eBay |
Cruisers and House Boats |
11 |
Michigan 012036
|
Amazon |
eBay |
Cruisers and House Boats |
11 |
Michigan Cupped 011034
|
Amazon |
eBay |
Cruisers and House Boats |
13 |
BRP 775713 |
Amazon |
eBay |
Hydrus Pontoon Boats |
13 |
BRP 763461 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
13 |
OEM 386909
|
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
13 |
Michigan 012037
|
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
15 |
BRP 778774 |
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
15 |
OEM 176421
|
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
15 |
Michigan Cupped 011027
|
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
15 |
OEM 386786
|
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
15 |
Michigan 012038
|
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
17 |
BRP 763462 |
Amazon |
eBay |
13-15 foot boats, Light Loads |
17 |
OEM 176422
|
Amazon |
eBay |
13-15 foot boats, Light Loads |
17 |
Michigan Cupped 011028
|
Amazon |
eBay |
13-15 foot boats, Light Loads |
17 |
OEM 386841
|
Amazon |
eBay |
13-15 foot boats, Light Loads |
17 |
Michigan 012039 |
Amazon |
eBay |
13-15 foot boats, Light Loads |
19 |
OEM 176423
|
Amazon |
eBay |
12-14 foot boats, Light Loads |
19 |
OEM 386908
|
Amazon |
eBay |
12-14 foot boats, Light Loads |
19 |
Michigan 012040 |
Amazon |
eBay |
12-14 foot boats, Light Loads |
Michigan Vortex Aluminum Props, XHS Drop-In Hub
- C Series Propellers Using XHS 111 or XHSII 221 Drop-In Hub Kit
- 13 Tooth Spline, 3-3/8 inch Gearcase, Thru-Hub Exhaust
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
8 |
Michigan 992401 |
Amazon |
eBay |
11-1/2 x 8, Right, 4-Blade |
9 |
Michigan 992402 |
Amazon |
eBay |
11-1/2 x 9, Right, 4-Blade |
10 |
Michigan 992403 |
Amazon |
eBay |
11-1/2 x 10, Right, 4-Blade |
13 |
Michigan 992301 |
Amazon |
eBay |
11-3/4 x 13, Right, 3-Blade |
13 |
Michigan 992311 |
Amazon |
eBay |
11-1/2 x 13, Right, 3-Blade |
15 |
Michigan 992302 |
Amazon |
eBay |
11-3/4 x 15, Right, 3-Blade |
15 |
Michigan 992312 |
Amazon |
eBay |
11-1/2 x 15, Right, 3-Blade |
17 |
Michigan 992303 |
Amazon |
eBay |
11-3/4 x 17, Right, 3-Blade |
40 - 75 HP Evinrude Johnson BRP Aluminum Propellers for Small 3-3/8" Gearcase (Thru-Hub Exhaust)
40 - 75 HP Evinrude Johnson BRP Stainless Steel Propellers for Small 3-3/8" Gearcase (Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
For Evinrude Johnson OMC BRP, 13 Tooth Spline
- 40-75 HP (Small Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 3-3/8 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
-
- 40 HP, 2 Cyl, 1984 - 2005
- 48 HP, 1987-1996
- 50 HP, 2 Cyl, 1975 - 2005
- 55 HP, 2 Cyl, 1976-1979
- 60 HP 2 Cyl, 1980-1985
- 65 HP, 2 Cyl, 1980-1985
- 75 HP, 3 Cyl, 1975-1985
- Sprint/Formula E 1986-1992
Sorted by Pitch.
Pitch is how far, in inches, the boat would travel with 1 prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
OMC and Michigan Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
13 |
BRP 763896 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
13 |
OMC 390849
|
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
13 |
Michigan 013024 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
15 |
BRP 763897 |
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
15 |
OMC 390850 |
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
15 |
Michigan 013010 |
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
17 |
BRP 763898 |
Amazon |
eBay |
13-15 foot boats, Light Loads |
17 |
OMC 390851 |
Amazon |
eBay |
13-15 foot boats, Light Loads |
17 |
Michigan 013026 |
Amazon |
eBay |
13-15 foot boats, Light Loads |
19 |
OMC 390852 |
Amazon |
eBay |
12-14 foot boats, Light Loads |
19 |
Michigan 013032 |
Amazon |
eBay |
12-14 foot boats, Light Loads |
Michigan Ballistic High-Performance Stainless Steel, XHS Drop-In Hub
- C Series Propellers Using XHS 111 or XHSII 221 Drop-In Hub Kit
- 13 Tooth Spline, 3-3/8 inch Gearcase, Thru-Hub Exhaust
Michigan Rapture Performance Stainless Steel
Rubber Hub
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
11 |
Michigan 013080 |
Amazon |
eBay |
Cruisers and House Boats |
13 |
Michigan 013081 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
15 |
Michigan 013082 |
Amazon |
eBay |
14-17 foot boats, All Loads, Ski |
17 |
Michigan 013083 |
Amazon |
eBay |
13-15 foot boats, Light Loads |
40 - 75 HP Evinrude Johnson BRP Aluminum Propellers for Small 3-3/8" Small Gearcase (Thru-Hub Exhaust)
40 - 75 HP Evinrude Johnson BRP Stainless Steel Propellers for Small 3-3/8" Small Gearcase (Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
Sierra International 18-5678 Marine Starter Drive Assembly for Johnson/Evinrude Outboard Motor
For Sierra 18-5624, 18-5630, 18-5648, OEM 586279, 586281, 586281 Starters
________________________________________________________________________________________
________________________________________________________________________________________
18-7042 Siearra Carb Kit
Note: 25, 35 HP 1995-Up Except 3 Cylinder Models
________________________________________________________________________________________
18-7093 Sierra Carburetor Needle and Seat
________________________________________________________________________________________
18-7222 Sierra Carb Kit With Float
________________________________________________________________________________________
18-7800 Fuel Pump Kit
- The Sierra 18-7800 Fuel Pump Kit is interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701. Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket.
- Sierra Fuel Pump Kit
- Meets or exceeds the original equipment quality
- Sierra part number: 18-7800
- Interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701
- Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket
________________________________________________________________________________________
18-4318 Powerhead Gasket Set
- Sierra Powerhead Gasket Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-4318
- Interchangeable with the following: Evinrude/Johnson 439083, 390076
Gasket Set Contains:
- 18-0963 Intake Manifold GasketTwin 335633 1
- 18-0850 Fuel Pump Mtg. Gasket 303615 1
- 18-0118 Carburetor Gasket 325092 2
- 18-0983 Carburetor to Airbox 321497 1
- 18-3802 Head Gasket 327795,335359 1
- 18-0941 Water Jacket Cover Gasket 315538 1
- 18-0157 Air Box Split Gasket 330698 1
- 18-0128 Powerhead Mounting Gasket 326468, 351018 1
- 18-0136 Powerhead Mounting Gasket 328283 1
- 18-1224 Exhaust Cover Gasket 315869 1
- 18-1218 Exhaust Cover Gasket 315868 1
- 18-0182 Seal 310058 1
Note 50 HP 1971-1975 use 315539 Head Gasket, plus
Note 55 HP 1976 use 320658 Head Gasket, plus
Note 55/60 HP 1980-1985 2-Cylinder
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
18-4305 Powerhead Gasket Set
- Gasket Kit, Powerhead Johnson/Evinrude 40-50hp 2cyl 1981-1999
- Replaces: 392609 18-4305, 9-64113
Gasket Set Contains:
18-0851 Relief Port Twin Gasket 329826 1
18-0850 Fuel Pump Mtg. Gasket 303615 1
18-0941 Water Jacket Cover Gasket 315538 1
18-0118 Carburetor Gasket 325092 2
18-0120 Exhaust Cover Gasket 325211 1
18-0128 Powerhead Mtg. Twin Gasket 326468, 351018 1
18-3802 Head Gasket 327795, 335359 1
18-0136 Powerhead Mounting Gasket 328283 1
18-0157 Airbox Split Twin Gasket 330698 1
18-0154 Airbox Split Twin Gasket — 1
18-0159 Airbox Split Twin Gasket 330909 1
18-0983 Carb. to Air Box Twin Gasket 321497 1
18-0182 Thermostat Gasket 310058 1
18-0963 Intake Manifold Twin Gasket 335633 1
________________________________________________________________________________________
- Unique anti-fouling design
- Engineered to exceed OE designs
- Maximum durability
- Designed for easy starting
________________________________________________________________________________________
________________________________________________________________________________________
18-5768 Power Pack
1993-1994 40 HP Rope
________________________________________________________________________________________
Also see: CHAMPION MARINE SPARK PLUG 5939 Marine Stainless Steel
- Evinrude Johnson 0.030 Gap
Mercury Outboards
- 125 HP 2004-1994 4-Cylinder
- 115 HP 2004-1989 4-Cylinder 2-Stroke
- 100 HP 1999-1988 4-Cylinder
- 90 HP 2006-1987 3-Cylinder 2-Stroke
- 80 HP 1989-1978
- 80 HP 2004-1995 80 Jet
- 75 HP 2006-1987 3-Cylinder 2-Stroke 2-Stroke
- 75 HP 1986-1984 4-Cylinder
- 75 HP 2001-1990 75 Sea Pro 2-Stroke
- 70 HP 1989-1987
- 65 HP 2004-1995 65 Jet
- 60 HP 2002-1991 3-Cylinder
- 60 HP 2004-1995 60 Big Foot 3-Cylinder
- 60 HP 2004-1991 60 Sea Pro 3-Cylinder
- 55 HP 2004-1992 55 Sea Pro
- 50 HP 2004-1991 50 3-Cylinder 2-Stroke 2-Stroke
- 45 HP 1989-1986
- 45 HP 2003-199 545 Jet 3-Cylinder
- 40 HP 2004-1995 2-Cylinder
- 40 HP 2004-1997 3-Cylinder
- 40 HP 1997-1988 4-Cylinder
- 40 HP 2004-1995 40 Sea Pro
- 30 HP 2003-1995 2-Cylinder 2-Stroke 2-Stroke
- 30 HP 2001-1998 30 Jet 3-Cylinder
- 30 HP 1997-1995 30 Jet 3-Cylinder
- 30 HP 2004-1995 30 Sea Pro 2-Cylinde
- 25 HP 2004-1980 2-Cylinder 2-Stroke 2-Stroke
- 25 HP 2002-1993 25 Sea Pro 2-Cylinder
- 20 HP 1981-1970
- 20 HP 2003-1986 2-Cylinder 2-Stroke
- 20 HP 2004-1995 20 Jet 2-Cylinder
- 10 HP 1996-1991
- 10 HP 2004-1991 10 Sea Pro
- 10 HP 1998 XR10
- 9.9 HP 1994-1986
- 9.8 HP 1978-1970
- 7.5 HP 1978-1970
- 4.5 HP 1985-1975
- 4 HP 1987-1986
- 4 HP 1974-1973
- 4 HP 1972
- 4 HP 1971-1970
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
CAGED BEARING KIT
- GLM Part Number: 22800; Sierra Part Number: 18-1352; Mercury Part Number: 31-67445; OMC Part Number: 378252
- Metal Cage 16 NEEDLES
- 1.375 Journal Size 40C (1974-Thru) 45-60HP 2-Cyl. (1971-Thru) 3-Cyl. (All) V4 (1962-1978)
________________________________________________________________________________________
18-1374 Wrist Pin Bearing
- Sierra Wrist Pin Rod
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1374
- Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217
________________________________________________________________________________________
18-1378 Rod Bearing Complete
Johnson/Evinrude Rod Bearing for (18-135HP) Outboard
________________________________________________________________________________________
________________________________________________________________________________________
18-3914 .02 OS Marine Piston Rings
3.207/.020 Bore
________________________________________________________________________________________
18-4105 Piston Kit
- .030 oversize
-
Bore Size 3.187
________________________________________________________________________________________
18-4115 Piston Kit
-
.020 Oversize
-
Johnson Evinrude 2cyl
-
Bore Size 3.207
________________________________________________________________________________________
18-4125 Marine Piston Kit
- Piston Kit Std Johnson/Evinrude 2 & 3 cyls 3.187 Bore
- Replaces: 391798,5006655 18-4125, 24110, 435546, 9-53400
- Standard Bore
________________________________________________________________________________________
Sierra 18-3913 Piston Ring
- For Evinrude/Johnson 2/3 Cylinder, 35-60 HP Motors
- Sierra Piston Rings
- Bore Size: 3.187/Std
- Sierra part number: 18-3913
- Interchangeable with the following: GLM 24310, Evinrude/Johnson 391170, 434107, Mallory 9-54400, Wiseco 3187KD
________________________________________________________________________________________
Sierra 18-3915 Piston Rings 3.217/.030
- Sierra Piston Rings
- For Johnson/Evinrude 3/2 Cylinder, 35-60 HP Motors
- Bore 3.217/.030
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3915
- Interchangeable with the following: GLM 24330, Evinrude/Johnson 391416, 434109, Mallory 9-54402, Wiseco 3217KD
________________________________________________________________________________________
18-2694 Lower Unit Seal Kit
Seal Kit Contents:
________________________________________________________________________________________
18-7123 O-Ring
ID: 2.235, Width: 0.100
________________________________________________________________________________________
18-7128 O-Ring
ID: 1.835, Width: 0.100
________________________________________________________________________________________
18-7137 Marine O-Ring
ID: 0.320, Width: 0.155
________________________________________________________________________________________
18-7145 Marine O-Ring
ID: 0.250, Width: 0.100
________________________________________________________________________________________
18-7172 O-Ring
ID: 3.250, Width: 0.135
________________________________________________________________________________________
18-7173 Marine O-Ring
ID: 1.875, Width: 0.135
________________________________________________________________________________________
18-7475 O-Ring
ID: 0.250, Width: 0.065
________________________________________________________________________________________
433567 Trim Tilt Seal Rebuild Kit, Kit
1989-2005 25HP 35HP 40HP 48HP 50HP with TNT Units
________________________________________________________________________________________
18-0543 Oil Seal
- OD: 1.926", Shaft: 1.540", Width: 0.243"
________________________________________________________________________________________
18-2059 Marine Oil Seal for OMC
Size: 0.750, OD: 1.126, Width: 0.200
________________________________________________________________________________________
18-2060 Marine Oil Seal for OMC
Note: 50/60 HP 1981-1983 - Electric Only
Note: 50/60 HP 1986-1987 - Small Gearcase Only
Size: 1.000, OD: 1.375, Width: 0.250
________________________________________________________________________________________
18-2063 Marine Oil Seal
Size: 0.625, OD: 1.124, Width: 0.188
________________________________________________________________________________________
18-2064 Marine Oil Seal
Size: 0.730, OD: 1.130, Width: 0.194
________________________________________________________________________________________
________________________________________________________________________________________