- Covers all 60-235 HP, 3-Cylinder, V4 and V6, 2-Stroke Models, Includes Jet Drives
- 1973-1991
- Repair Manual
________________________________________________________________________________________
________________________________________________________________________________________
18-3390 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
18-3392 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
435526 Chrome Water Pump Kit
________________________________________________________________________________________
435990 Water Pump Impeller Housing
Note: 90/115 HP 1995-2006 Looper (except SL Model)
________________________________________________________________________________________
18-1506 Vernatherm
140 deg farenheigt
________________________________________________________________________________________
18-1117 Pinion Bearing
- Sierra Pinion Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1117
- Interchangeable with the following: Chrysler 31-F694057, 31-42647A1, GLM 21610, Evinrude/Johnson 387817, 5007751, Mallory 9-75121, Mercruiser/Mercury 31-42647A1, 31-42647
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
18-1158 Marine Carrier Bearing
- Sierra Solenoid
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5815
- Interchangeable with the following: Arco SW275, GLM 72370, Mallory 9-15111, Mercury/Mercruiser 89-76545T, 89-61053, 89-68258, 89-68258A4, 89-76545, 89-15857
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
18-1351 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1351
- Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407
________________________________________________________________________________________
18-1365 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1365
- Interchangeable with the following: GLM 16330, Evinrude/Johnson 387656, 383248, OMC 387656
- Thrust Driveshaft Johnson/Evinrude 90-250hp OMC Stringer/Cobra All Models
________________________________________________________________________________________
18-1366 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1366
- Interchangeable with the following: GLM 16300, Evinrude/Johnson 382408
________________________________________________________________________________________
18-2216 Sliding Clutch
- Sierra Sliding Clutch
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2216
- Interchangeable with the following: GLM 22625, Evinrude/Johnson 337772, 37774, 334516, 336562, 910995, Mallory 9-72534, OMC 910995, 334516
________________________________________________________________________________________
18-2229 Driveshaft Shim
.003", 1.24 ID
________________________________________________________________________________________
18-2230 Driveshaft Shim
.004", 1.24" ID
________________________________________________________________________________________
18-2231 Driveshaft Shim
.005", 1.24" ID
________________________________________________________________________________________
18-3708 Prop Nut & Keeper
________________________________________________________________________________________
18-3715 Marine Prop Nut Kit
Kit Contents:
________________________________________________________________________________________
18-3741 Marine Cotter Pin
1/8" x 1 3/4"
________________________________________________________________________________________
18-4223 Marine Thrust Washer
________________________________________________________________________________________
18-4231 Marine Prop Spacer
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards (15 Spline)
- 90 HP V-4 1995-Newer
- 100 HP V-4 Commercial 1884-Newer
- 115 HP V-4 1995-Newer
- 130 HP V-4 1995 Newer
- 120 - 140 HP V-4 1985
- 140 HP V4 1989-1994
- 150 HP V-6 1978-Newer
- 150 HP V-6 Commercial 1993-Newer
- 155 HP V-6 Commercial 1978-Newer
- 175 HP V-6 1977-Newer
- 185 HP V-6 1984-1985
- 200 HP V-6 1976-Newer
- 225 HP V-6 1986-Newer
- 235 HP V-6 1978-1985
- 250 HP V-6 2001-Newer
- 2.6 Liter V6 1984-1985
- 250 HP V-8 1991-Newer
- 275 HP V-8 1986-1988
- 300 HP V-8 1986-1995
- 3.6 Liter V-8 1986-1987
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
10 |
Michigan 011015 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
13 |
OMC 391536 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
OMC 391535 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
Michigan 011006 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
17 |
OMC 391200 |
Amazon |
eBay |
20-26 foot boats, All Loads Ski. |
17 |
Michigan 011007 |
Amazon |
eBay |
20-26 foot boats, All Loads Ski. |
19 |
OMC 391201 |
Amazon |
eBay |
18-22 foot boats, All Loads Ski. |
19 |
Michigan 011008 |
Amazon |
eBay |
18-22 foot boats, All Loads Ski. |
21 |
OMC 391202 |
Amazon |
eBay |
17-19 foot boats, All Loads Ski. |
21 |
Michigan 011009 |
Amazon |
eBay |
17-19 foot boats, All Loads Ski. |
23 |
OMC 391203 |
Amazon |
eBay |
15-18 foot boats, All Loads Ski. |
23 |
Michigan 011010 |
Amazon |
eBay |
15-18 foot boats, All Loads Ski. |
Other compatible propeller options:
90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards (15 Spline)
- 90 HP V-4 1995-Newer
- 100 HP V-4 Commercial 1884-Newer
- 115 HP V-4 1995-Newer
- 130 HP V-4 1995 Newer
- 120 - 140 HP V-4 1985
- 140 HP V4 1989-1994
- 150 HP V-6 1978-Newer
- 150 HP V-6 Commercial 1993-Newer
- 155 HP V-6 Commercial 1978-Newer
- 175 HP V-6 1977-Newer
- 185 HP V-6 1984-1985
- 200 HP V-6 1976-Newer
- 225 HP V-6 1986-Newer
- 235 HP V-6 1978-1985
- 250 HP V-6 2001-Newer
- 2.6 Liter V6 1984-1985
- 250 HP V-8 1991-Newer
- 275 HP V-8 1986-1988
- 300 HP V-8 1986-1995
- 3.6 Liter V-8 1986-1987
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
OMC and Michigan Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
OMC 174926
|
Amazon |
eBay |
Cruisers and House Boats |
15 Right |
Michigan 013052
|
Amazon |
eBay |
Cruisers and House Boats |
15 Left |
OMC 174927
|
Amazon |
eBay |
Cruisers and House Boats |
15 Left |
Michigan 013051
|
Amazon |
eBay |
Cruisers and House Boats |
17 Right |
OMC 391290
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Right |
Michigan 013044
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
OMC 431930
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
Michigan 013042
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
19 Right |
OMC 389924
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Right |
Michigan 013046
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
OMC 390821
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
Michigan 013045
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
21 Right |
OMC 389923
|
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Right |
Michigan 013048 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
OMC 390822 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
Michigan 013047 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
23 Right |
OMC 389019 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
23 Right |
Michigan 013050 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
Michigan Rapture Performance Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
Michigan 013064 |
Amazon |
eBay |
Heavy Boats, House Boats |
15 Left |
Michigan 013065 |
Amazon |
eBay |
Heavy Boats, House Boats |
17 Right |
Michigan 013066 |
Amazon |
eBay |
20-26 foot, All Load, Ski |
17 Left |
Michigan 013067 |
Amazon |
eBay |
20-26 foot, All Load, Ski |
19 Right |
Michigan 013068 |
Amazon |
eBay |
18-22 foot, All Load, Ski |
19 Left |
Michigan 013069 |
Amazon |
eBay |
18-22 foot, All Load, Ski |
21 Right |
Michigan 013070 |
Amazon |
eBay |
17-19 foot, All Load, Ski |
21 Left |
Michigan 013071 |
Amazon |
eBay |
17-19 foot, All Load, Ski |
23 Right |
Michigan 013072 |
Amazon |
eBay |
15-18 foot, All Load, Ski |
23 Left |
Michigan 013073 |
Amazon |
eBay |
15-18 foot, All Load, Ski |
25 Right |
Michigan 013074 |
Amazon |
eBay |
Up to 17 foot, All Load, Ski |
25 Left |
Michigan 013075 |
Amazon |
eBay |
Up to 17 foot, All Load, Ski |
Michigan Ballistic High-Performance Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
Michigan 345031 |
Amazon |
eBay |
Cruisers, House Boats |
17 Right |
Michigan 345032 |
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
Michigan 345062 |
Amazon |
eBay |
20-26 foot, All Loads, Ski |
19 Right |
Michigan 345033 |
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
Michigan 345063 |
Amazon |
eBay |
18-22 foot, All Loads, Ski |
21 Right |
Michigan 345034 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
Michigan 345064 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
25 Right |
Michigan 345035 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
25 Left |
Michigan 345065 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
Other compatible prop options:
90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers
Stainless Steel V6 135-300 HP & 90-130 HP, 25" Shaft, 2-Stroke
- 15 Spline
- TBX Propeller Hub Kit 177283 for Evinrude/Johnson V6 Outboards Amazon eBay
-
- Note: There is also a TBX Hub Kit that makes these propellers work with Suzuki / Mercury / Honda / Yamaha V6 outboards. 177288 Amazon eBay
-
- 90 & 115 HP Evinrude® E-TEC®, 25" Shaft, 2004-thru
- 100 HP, 2004-thru
- 100 HP Commercial, 1984-thru
- 120 & 140 HP, 1985
- 130 HP, 1995-1996
- 130 HP Evinrude® E-TEC®, 2009-2010
- 135 HP, 2000-thru
- 140 HP (25"), 1989-thru
- 150 & 155 HP Commercial, 1978-thru
- 150-300 HP, Evinrude® E-TEC®, 2004-thru
- 175 HP, 1977-thru
- 185 HP, 1984-1985
- 200 HP, 1976-thru
- 225 HP, 1986-thru
- 235 HP, 1978-1985
- 2.6 liter, 1984-1985
- 250 HP, 1991-thru
- 275 HP, 1986-1988
- 300 HP, 1988-thru
- 3.6 liter, 1986-1987
- Evinrude® E-TEC® G2, 2015-thru
- Note: All V6 stainless steel propellers, fitted to Evinrude® E-TEC® G2 outboards require an additional purchase of custom fit G2 TBX™ hub kit #767683 Amazon eBay
Stainless Steel, Stern Drive 15 Spline Propellers
15 Spline
800 Series
- 3.8 - 5.7 Liter, 1978-thru
OMC Cobra®
- 4.3 - 5.7 Liter, 1986-thru
OMC Sea Drive®
- 2.0 - 4.0 Liter, 1982-thru
OMC King Cobra®
- 7.4 - 8.2 Liter, 1990-thru
BRP Evinrude Polished Stainless Steel TBX Propellers
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
11 |
BRP 763959 |
Amazon |
eBay |
15-5/8 x 11, RH, 3 Blade |
13 |
BRP 763960 |
Amazon |
eBay |
15-5/8 x 13, RH, 3 Blade |
13 |
BRP 763961 |
Amazon |
eBay |
15-5/8 x 13, LH, 3 Blade |
15 |
BRP 763962 |
Amazon |
eBay |
15 x 15, RH, 3 Blade |
15 |
BRP 763963 |
Amazon |
eBay |
15 x 15, LH, 3 Blade |
BRP Evinrude Viper TBX Stainless Steel Propellers for Runabouts and General Recreation
If you want speed, you want the Viper prop. It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed. Excellent on any recreational boat, from runabouts and cruisers to deck boats.
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
- Versatile 3-Blade performance
- Excellent balance of speed and durability
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
14 |
BRP 763910 |
Amazon |
eBay |
15 x 14, RH, 3-Blade |
14 |
BRP 763911 |
Amazon |
eBay |
15 x 14, LH, 3-Blade |
16 |
BRP 763912 |
Amazon |
eBay |
14-3/4 x 16, RH, 3-Blade |
16 |
BRP 763913 |
Amazon |
eBay |
14-3/4 x 16, LH, 3-Blade |
17 |
BRP 763914 |
Amazon |
eBay |
14-3/4 x 17, RH, 3-Blade |
17 |
BRP 763915 |
Amazon |
eBay |
14-3/4 x 17, RH, 3-Blade |
18 |
BRP 763916 |
Amazon |
eBay |
14-3/4 x 18, RH, 3-Blade |
18 |
BRP 763917 |
Amazon |
eBay |
14-3/4 x 18, LH, 3-Blade |
19 |
BRP 763918 |
Amazon |
eBay |
14-3/4 x 19, RH, 3-Blade |
19 |
BRP 763919 |
Amazon |
eBay |
14-3/4 x 19, LH, 3-Blade |
20 |
BRP 763920 |
Amazon |
eBay |
14-3/4 x 20, RH, 3-Blade |
20 |
BRP 763921 |
Amazon |
eBay |
14-3/4 x 20, LH, 3-Blade |
21 |
BRP 763922 |
Amazon |
eBay |
14-1/2 x 21, RH, 3-Blade |
21 |
BRP 763923 |
Amazon |
eBay |
14-1/2 x 21, LH, 3-Blade |
22 |
BRP 763924 |
Amazon |
eBay |
14-1/4 x 22, RH, 3-Blade |
22 |
BRP 763925 |
Amazon |
eBay |
14-1/4 x 22, LH, 3-Blade |
BRP Evinrude Cyclone TBX Stainless Steel 4-Blade for Offshore Cruising and Runabouts
When you need a prop that can hold course straight and true in all water conditions, trust the Cyclone prop to maintain compass headings and stay hooked up in big water. Designed for heavier and twin-engine boats as well as runabouts.
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
- Ultimate performance 4-blade offshore and runabout propeller
- Stays on plane with minimum RPM
- Tracks true in all water conditions
- Less vibrations and improved fuel economy
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
15 |
BRP 763936 |
Amazon |
eBay |
14-1/2 x 15, RH, 4-Blade |
15 |
BRP 763937 |
Amazon |
eBay |
14-1/2 x 15, LH, 4-Blade |
17 |
BRP 763938 |
Amazon |
eBay |
14-1/4 x 17, RH, 4-Blade |
17 |
BRP 763939 |
Amazon |
eBay |
14-1/4 x 17, LH, 4-Blade |
18 |
BRP 763940 |
Amazon |
eBay |
14-1/8 x 18, RH, 4-Blade |
18 |
BRP 763941 |
Amazon |
eBay |
14-1/8 x 18, LH, 4-Blade |
19 |
BRP 763942 |
Amazon |
eBay |
14-1/8 x 19, RH, 4-Blade |
19 |
BRP 763943 |
Amazon |
eBay |
14-1/8 x 19, RH, 4-Blade |
20 |
BRP 763944 |
Amazon |
eBay |
14 x 20, RH, 4-Blade |
20 |
BRP 763945 |
Amazon |
eBay |
14 x 20, LH, 4-Blade |
21 |
BRP 763946 |
Amazon |
eBay |
14 x 21, RH, 4-Blade |
21 |
BRP 763947 |
Amazon |
eBay |
14 x 21, LH, 4-Blade |
23 |
BRP 763948 |
Amazon |
eBay |
14 x 23, RH, 4-Blade |
23 |
BRP 763949 |
Amazon |
eBay |
14 x 23, LH, 4-Blade |
BRP Evinrude Rebel TBX Stainless Steel 3-Blade Props for Offshore Cruising
The Rebel propeller is designed and engineered to deliver improved midrange cruising and top-end performance on V6 Evinrude E-TEC. Large diameter and efficient blade contour provide faster speeds at lower RPMs to deliver significant improvement in fuel economy. You will get more miles to the gallon and a longer cruising range. Standard rotation and counter-rotation models are available from 15 to 25-inch pitch. Use the Rebel propeller on offshore boats, large runabouts, and even large pontoon boats to make them perform to their maximum potential.
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
- High polish stainless steel
- Designed and engineered for efficient midrange cruising
- Improved fuel economy with a longer cruising range
- Use on offshore boats, large runabouts, and pontoon boats.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
15 |
BRP 763984 |
Amazon |
eBay |
15-3/4 x 15, RH, 3-Blade |
15 |
BRP 763985 |
Amazon |
eBay |
15-3/4 x 15, LH, 3-Blade |
17 |
BRP 763986 |
Amazon |
eBay |
15-1/2 x 17, RH, 3-Blade |
17 |
BRP 763987 |
Amazon |
eBay |
15-1/2 x 17, LH, 3-Blade |
18 |
BRP 763988 |
Amazon |
eBay |
15-3/8 x 18, RH, 3-Blade |
18 |
BRP 763989 |
Amazon |
eBay |
15-3/8 x 18, LH, 3-Blade |
19 |
BRP 763990 |
Amazon |
eBay |
15-1/4 x 19, RH, 3-Blade |
19 |
BRP 763991 |
Amazon |
eBay |
15-1/4 x 19, LH, 3-Blade |
20 |
BRP 763992 |
Amazon |
eBay |
15-1/8 x 20, RH, 3-Blade |
20 |
BRP 763993 |
Amazon |
eBay |
15-1/8 x 20, LH, 3-Blade |
21 |
BRP 763994 |
Amazon |
eBay |
15 x 21, RH, 3-Blade |
21 |
BRP 763995 |
Amazon |
eBay |
15 x 21, LH, 3-Blade |
22 |
BRP 763996 |
Amazon |
eBay |
14-7/8 x 22, RH, 3-Blade |
22 |
BRP 763997 |
Amazon |
eBay |
14-7/8 x 22, LH, 3-Blade |
23 |
BRP 763998 |
Amazon |
eBay |
14-3/4 x 23, RH, 3-Blade |
23 |
BRP 763999 |
Amazon |
eBay |
14-3/4 x 23, LH, 3-Blade |
25 |
BRP 764000 |
Amazon |
eBay |
14-1/2 x 25, RH, 3-Blade |
25 |
BRP 764001 |
Amazon |
eBay |
14-1/2 x 25, LH, 3-Blade |
BRP Evinrude Raker H.O. Propellers for Bass Boats and High Performance
Looking to plane fast - and run faster? The Raker II prop is specially designed for building up the engine RPMs and getting you on plane faster. A great prop in surfacing conditions, especially when the boat is running over 50 mph. Perfect for bass boats and high-performance boats. The Raker propeller utilizes vent holes in the outer exhaust hub to allow exhaust gases to ventilate the blade area. This allows the engine to build up RPMs and get the boat on plane faster. At higher speeds, the water from rushing past the hub blocks these vent holes, preventing. them from ventilating the blades. V6 Raker II use the TBX hub system
- Fast, Fast, Fast
- Uses the TBX hub system
- Custom cupped high rake blades provide superior bow lift and exceptional top-end speed
- Special vent holes for powerful acceleration
- Set the highest standards in top speed performance
- Maximizes the superior power and torque of Evinrude E-TEC G2 engine
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
22 |
BRP 177264 |
Amazon |
eBay |
14-1/2 x 22, RH, 3-Blade |
24 |
BRP 177265 |
Amazon |
eBay |
14-1/2 x 24, RH, 3-Blade |
24 |
BRP 177309 |
Amazon |
eBay |
14-1/2 x 24, RH, 3-Blade |
25 |
BRP 177299 |
Amazon |
eBay |
14-1/2 x 25, RH, 3-Blade |
26 |
BRP 177266 |
Amazon |
eBay |
14-1/2 x 26, RH, 3-Blade |
28 |
BRP 177267 |
Amazon |
eBay |
14-1/2 x 28, RH, 3-Blade |
Other compatible propeller options:
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, Aluminum Propellers
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers
Return to Propellers:
________________________________________________________________________________________
Evinrude/Johnson Aluminum Props
-More Performance for the Money! Evinrude/Johnson props are cast with a custom aluminum alloy to give them greater strength and longer life than ordinary propellers. Many of the Evinrude/Johnson outboards are speed cupped for better top-end performance. Special baked-on corrosion-resistant paint gives added protection against saltwater and galvanic corrosion.
- Precision casting provides greater strength and longer life
- Baked-on corrosion-resistant paint gives added protection
- Engineered to match the power curve of your outboard for superior performance.
V6 Outboard 150-300 HP & 90 - 300 HP, 25" Shaft, 2-Stroke
- 15 Spline
- TBX Propeller Hub Kit 765195 Amazon eBay for Evinrude/Johnson props with Interchangeable Hub
- Other TBX Propeller Kits available competitive brands.
-
- 90 & 115 HP Evinrude® E-TEC®, 25" Shaft, 2004-thru
- 100 HP, 2004-thru
- 100 HP Commercial, 1984-thru
- 120 & 140 HP, 1985
- 130 HP, 1995-1996
- 130 HP Evinrude® E-TEC®, 2009-2010
- 135 HP, 2000-thru
- 140 HP (25"), 1989-thru
- 150 & 155 HP Commercial, 1978-thru
- 150-300 HP, Evinrude® E-TEC®, 2004-thru
- 175 HP, 1977-thru
- 185 HP, 1984-1985
- 200 HP, 1976-thru
- 225 HP, 1986-thru
- 235 HP, 1978-1985
- 2.6 liter, 1984-1985
- 250 HP, 1991-thru
- 275 HP, 1986-1988
- 300 HP, 1988-thru
- 3.6 liter, 1986-1987
- Evinrude® E-TEC® G2, 2015-thru
V6 Stern Drive 15 Spline Propellers
15 Spline
800 Series
- 3.8 - 5.7 Liter, 1978-thru
OMC Cobra®
- 4.3 - 5.7 Liter, 1986-thru
OMC Sea Drive®
- 2.0 - 4.0 Liter, 1982-thru
OMC King Cobra®
- 7.4 - 8.2 Liter, 1990-thru
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
13 |
BRP 763453 |
Amazon |
eBay |
15-1/2 x 13, RH, 3-Blade, Rubber Hub |
15 |
BRP 765186 |
Amazon |
eBay |
15 x 15, RH, 3-Blade, Interch Hub |
17 |
BRP 765187 |
Amazon |
eBay |
14.8 x 17, RH, 3-Blade, Interch Hub |
19 |
BRP 765188 |
Amazon |
eBay |
14-1/2 x 19, RH, 3-Blade, Interch Hub |
21 |
BRP 765189 |
Amazon |
eBay |
14.3 x 21, RH, 3-Blade, Interch Hub |
23 |
BRP 763470 |
Amazon |
eBay |
14.2 x 23, RH, 3-Blade, Rubber Hub |
Other compatible propeller options:
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Aluminum Propellers
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers
Return to Propellers:
________________________________________________________________________________________
18-5697 Starter Brush and Spring Set
- Sierra Brush and Spring Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5697
- Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384
________________________________________________________________________________________
Power Trim Relay 586224 582472 584416 18-5705 Johnson Evinrude OMC
________________________________________________________________________________________
________________________________________________________________________________________
18-5832 Regulator/Rectifie
- Regulator/Rectifier for Johnson/Evinrude Outboard Engines
- Replaces: Johnson/Evinrude 583689, 583266, 586000, 584424 and CDI 193-3689
- For: Johnson/Evinrude Outboard Applications
- Sierra Part Number 18-5832
- All Sierra parts qualify for and are covered under Sierra's Industry Leading Customer Satisfaction Warranty
________________________________________________________________________________________
18-7094 Carburetor Needle and Seat
________________________________________________________________________________________
18-7248 Carb Kit
Note: 130 HP - P suffix only
________________________________________________________________________________________
398172 Powerhead Gasket Set
V6 Loop 90 deg
________________________________________________________________________________________
18-2075 Marine Oil Seal
Size: 1.562, OD: 2.062, Width: 0.300
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
- Unique anti-fouling design
- Engineered to exceed OE designs
- Maximum durability
- Designed for easy starting
________________________________________________________________________________________
18-5179 Ignition Plug In Coil
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Sierra 18-1353 Center Main Bearing
- Sierra Center Main Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1353
- Interchangeable with the following: GLM 22810, Evinrude/Johnson 5007190, 387041
________________________________________________________________________________________
18-1377 Center Main Bearing
- Sierra Center Main Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1377
- Interchangeable with the following: GLM 22710, Evinrude/Johnson 352960, 320499
________________________________________________________________________________________
18-1396 Marine Lower Crankshaft Bearing
________________________________________________________________________________________
18-3904 Marine Piston Ring
3.500 inch Standard Bore
________________________________________________________________________________________
18-3905 Marine Piston Ring
- 4 and 6 cylinder
- 3.53 inch bore (.03 oversize)
- OMC 396504
________________________________________________________________________________________
18-4101 Marine Piston (Starbord) for Johnson/Evinrude
- Loopcharged Pistons for 90 Degrees V4/V6/V8 120HP (1985-1987) 140HP (1985-1987) 200HP (1986-1987) 225HP (1986-1987) 275HP (1985-1987) 300HP (1985-1987) Size: 3.500 + .030
- 2.530 inch (starbord) (.030 oversize)
________________________________________________________________________________________
18-4102 Piston Kit - .030 Port
- Loopcharged Pistons for 90 Degrees V4/V6/V8
- 2.530 inch (port) (.030 oversize)
________________________________________________________________________________________
18-4121 PISTON KIT - STBD
- V4 and V6 Small Bore Loopers
- 120-300 HP
- 3.500 inch bore (starbord) (standard bore)
- Loopcharged Pistons for 90 Degrees V4/V6/V8 120HP (1985-1987) 140HP (1985-1987) 200HP (1986-1987) 225HP (1986-1987) 275HP (1985-1987) 300HP (1985-1987) Size: 3.500"
________________________________________________________________________________________
392591 Connecting Rod
- Johnson Evinrude Connecting Rod
- 392591
- C# 321712
________________________________________________________________________________________
Sierra 18-1360 Rod Bearing
- Sierra Rod Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1360
- Interchangeable with the following: GLM 22850, Evinrude/Johnson 396041, Mallory 9-51104
________________________________________________________________________________________
Sierra 18-1376 Wrist Pin Bearing
- Sierra Wrist Pin Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1376
- Interchangeable with the following: GLM 16230, Evinrude/Johnson 434844
________________________________________________________________________________________
________________________________________________________________________________________
Sierra 18-4122 Piston Kit Standard Bore Port
- V4 and V6 Small Bore Loopers
- 120-300 HP
- 3.500 inch bore (port) (standard bore)
- Loopcharged Pistons for 90 Degrees
________________________________________________________________________________________
18-3906 Marine Piston Ring
________________________________________________________________________________________
Sierra International 18-4111 Marine Piston
- V4 and V6 Small Bore Loopers
- 120-300 HP
- 3.520 inch bore (starbord) (.020 oversize bore)
- Loopcharged Pistons for 90 Degrees V4/V6/V8 120HP (1985-1987) 140HP (1985-1987) 200HP (1986-1987) 225HP (1986-1987) 275HP (1985-1987) 300HP (1985-1987) Size: 3.500 + .020
________________________________________________________________________________________
Sierra International 18-4112 Marine Piston
- V4 and V6 Small Bore Loopers
- 120-300 HP
- 3.520 inch bore (port) (.020 oversize bore)
- Loopcharged Pistons for 90 Degrees V4/V6/V8 120HP (1985-1987) 140HP (1985-1987) 200HP (1986-1987) 225HP (1986-1987) 275HP (1985-1987) 300HP (1985-1987) Size: 3.520"
________________________________________________________________________________________
________________________________________________________________________________________
174003 Johnson Evinrude OMC OEM O-Ring Packagefor TNT
1982-1988 60-235HP 3 and 4 Cylinder with Prestolite Tilt Cylinder
________________________________________________________________________________________
________________________________________________________________________________________
18-7111 O-Ring
ID: 0.197, Width 0.113
________________________________________________________________________________________
18-7115 O-Ring
ID: 0.1735, Wisth: 0.135
________________________________________________________________________________________
18-2002 Oil Seal
Size: 1.188, OD: 1.692, Width: .250
________________________________________________________________________________________
Size: 0.822, OD: 1.375, Width: 0.195
________________________________________________________________________________________
18-2062 Marine Oil Seal
Size: 0.875, OD: 1.375, Width: 0.207
________________________________________________________________________________________
18-2074 Oil Seal
Size: 1.625, OD: 2.125, Width: 0.250
________________________________________________________________________________________
18-5619 Starter
90 deg V6 V8 Loop, Standard Rotation
115-300 E-TEC
________________________________________________________________________________________