Evinrude/Johnson/OMC/BRP 25 HP 2004 Model J25ELSRM J25GTESRS J25PL4SRS J25RSRR J25RLSRR J25TESRA J25TELSRA J25TEL4SRS

Clymer - Evinrude/Johnson Outboard Shop Manual: 2-70 HP Two-Stroke 1995-2007 (Includes Jet Drive Models)  B735

• Covers 2 - 70 HP, 2-Stroke
• 1995-2007
• Shop Manual

SELOC - Seloc Johnson/Outboards 2002-07 Repair Manual: All 2-Stroke and 4-Stroke Models  #1314

• Covers 2.5 - 250 HP,  All 2 and 4-Stroke Models
• 2002-2007
• Repair Manual

18-3051 Impeller

18-3359  Impeller Wear Plate

18-3367 Water Pump Housing

 18-3381 Water Pump Repair Kit Without Housing

• The Sierra 18-3381 Water Pump Kit without Housing is interchangeable with the following: GLM 12071, Evinrude/Johnson 0393509, 0393630, Mallory 9-48205.
• Sierra Water Pump Kit without Housing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3381
• Interchangeable with the following: GLM 12071, Evinrude/Johnson 0393509, 0393630, Mallory 9-48205

18-3382 Water Pump Repair Kit With Housing

18-3401 Water Pump Repair Kit Without Housing

5031417 Impeller

5031744 Water Pump Repair Kit

4-Stroke

15 H.O. - 35 HP Aluminum and Stainless Steel Propellers for Johnson Evinrude (Thru Hub Exhaust), 3" Gearcase, 14 Tooth Spline

• For Evinrude Johnson OMC BRP
• 15 HP E-Tech H.O.  High Thurst, 2011 - Newer
• 20 HP 2 Cylinder 1984 - 1997
• 25 HP Commercial 1992 - Newer
• 25 HP 2 & 3 Cylinder  1984 - Newer
• 25 HP E-TEC  2990 - Newer
• 30 HP 2 Cylinder 1984 - Newer
• 30 HP E-TEC  2990 - Newer
• 35 HP 2 Cylinder  1979 - 1983
• 35 HP 3 Cylinder  1997-2001

15 H.O. - 35 HP Aluminum  14 Tooth Spline Drive

• Ruber Hub
• 14 Tooth Spline
• 3 Inch Gearcase

Evinrude Johnson BRP Stainless Steel Spline Drive

• Rubber Hub
• 14 Tooth Spline
• 3 Inch Gearcase
• Great props but hard to find.

Michigan Vortex Aluminum Spline Drive

• You MUST use 991224 Gearcase Adapter Ring supplied with the propeller.
• E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
• 14 Tooth Spline, 3-inch Gearcase

Ballistic High-Performance Stainless Steel Spline Drive

• E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
• 14 Tooth Spline, 3-inch Gearcase

25-30 HP 4-Stroke, Aluminum and Stainless Steel Propellers, 3 Inch Gearcase, 10 Tooth Spline

• For Evinrude Johnson OMC & Suzuki
• 25 HP 4-Stroke, 2000 - Up
• 30 HP 4-Stroke, 2000 - Up
• Be sure to count the number of spline teeth on your prop shaft.
• Thru Hub Exhaust, 10 Spline, 3" Gearcase, Rubber Hub
• Michigan:  You MUST use Gearcaase Adapter Ring 991224 supplied with the propeller.

15, 25 HP 4-Stroke, Aluminum

• 10 Tooth Spline DriveRubber Hub
• Rubber Hub

Michigan Vortex Aluminum 10 ToothSpline Drive, XHS HUB

• You MUST use 991224 Gearcase Adapter Ring supplied with the propeller.
• E Series, Uses XHS 121 or new XHSII 221 Drop-In Hub  Kit
• 10 Tooth Spline, 3-inch Gearcase

Michigan Ballistic High-Performance Stainless Steel 10 Tooth Spline Drive, XHS HUB

• E Series, Uses XHS 121 or new XHSII 221 Drop-In Hub  Kit
• 10 Tooth Spline, 3-inch Gearcase

May interfere with Trim Tab

Return to Propellers:

18-5808 STARTER SOLENOID

Sierra 18-5826 Regulator/Rectifier

• Sierra Regulator/Rectifier
• Meets or exceeds the original equipment quality
• Sierra part number: 18-5826
• Interchangeable with the following: Evinrude/Johnson 584890

18-6815 Trim Motor

• Sierra Evinrude/Johnson Trim Motor
• Meets or exceeds the original equipment quality
• Sierra part number: 18-6815
• Fits 40-50 HP (2004-2009), 60 HP (2006-2009), and 25-30 HP (2009) engines

18-3497 Fuel Pump Diaphragm Kit

18-3499 Diaphragm Kit

For: 9.9/15 2002-2004, 25 HP 2004-2006, 30 HP 2004-2007, 40 HP 2002-2006 4-Stroke

18-6528 Throttle Cable (23 1/2")

• Sierra Throttle Cable
• Meets or exceeds the original equipment quality
• Sierra part number: 18-6528
• Interchangeable with the following: Evinrude/Johnson 5000581, 396161

18-7042 Siearra Carb Kit

Note: 25, 35 HP 1995-Up Except 3 Cylinder Models

18-7353 Fuel Pump

• Sierra Fuel Pump
• Uses Kit 18-7800
• Meets or exceeds the original equipment quality
• Sierra part number: 18-7353
• Interchangeable with the following: Evinrude/Johnson 438555, 433386, Mallory 9-35353

18-7773 Carburetor Rebuild Kit

Fits:  25, 30 HP 4-Stroke 2000-2001, 2004 & Up

18-7800 Fuel Pump Kit 

• The Sierra 18-7800 Fuel Pump Kit is interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701. Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket.
• Sierra Fuel Pump Kit
• Meets or exceeds the original equipment quality
• Sierra part number: 18-7800
• Interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701
• Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket

18-7716 Fuel Filter

Fits 25 HP 4-Stroke (2004-2005), 30 HP 4-Stroke (2004-2007), 40/60/70 HP 4-Stroke (2002-2006), 90/115/140 4-Stroke (2003-2004, 2006), Evinrude 25/40/50/70 HP 4-Stroke (2000-2001)

18-3803 Head Gasket

18-4307 Powerhead Gasket Set

Gasket Set Contents:

• 18-0850 Fuel Pump Mounting Gasket 303615      1
• 18-0971 By-Pass Gasket                  319661        1
• 18-0981 Leaf Plate Gasket                321479       1
• 18-0106 Exhaust Manifold Gasket      324323      2
• 18-0118 Carburetor Gasket              325092        1
• 18-2862 Manifold to Leaf Plate Gasket 321573, 326260  1
• 18-0126 Inner Exhaust Cover Gasket   326264       1
• 18-2852 Powerhead to Lower Unit Gasket 330621   1
• 18-3803 Head Gasket           329419, 765012         1

5031916 Cylinder Head Gasket

4-Stroke

18-5179 Ignition Plug In Coil

585224 Power Pack

Champion RA8HC (810) - Copper Plus Spark Plug

Evinrude / Johnson

• Plug Gap 0.30
• 4-Stroke Engines

Mercury Outboards

• 60 HP 2004-2001  60 4-Cylinder 4-Stroke 4-Stroke  RA8HC  0.035
• 50 HP 2004-1995  Big Foot 4-Cylinder 4-Stroke 4-Stroke  RA8HC  0.035
• 45 HP 2004-1995  45 BoDensee 4-Cylinder  RA8HC  0.035
• 40 HP 2004-1998  Big Foot D706 4-Stroke  RA8HC  0.035
• 30 HP 2004-1999  2-Cylinder 4-Stroke 4-Stroke  RA8HC  0.035
• 25 HP 2004-1997  Big Foot 4-Stroke  RA8HC  0.035
• 15 HP 2004-1998  Big Foot 4-Stroke  RA8HC  0.035
• 9.9 HP 2004-2000  2-Cylinder 4-Stroke 4-Stroke  RA8HC  0.035
• 6 HP 2004-2000  1-Cylinder 4-Stroke 4-Stroke  RA8HC  0.035
• 5 HP 2004-2000  1-Cylinder 4-Stroke 4-Stroke  RA8HC  0.035
• 4 HP 2004-2000  1-Cylinder 4-Stroke 4-Stroke  RA8HC  0.035
•  

Champion RL82C, QL82C, BR7HS (874M) Marine

• Johnson/Evinrude Gap 0.03

Also see: Champion (5931) Stainless Steel Marine Spark Plug

Mercury Outboard

• 110 HP  1969-1967 1100     0.03
• 95 HP  1969-1967 950    0.03
• 65 HP  1969-1967  650S    0.03
• 50 HP  1969-1967  500M     0.03
• 50 HP  1969-1967  500S     0.03
• 35 HP  1969-1967  350     0.03
• 20 HP  1969-1967  110     0.03
• 20 HP  1969-1967  200     0.03
• 11 HP  1969-1967  110    0.03
• 11 HP  1969-1967  200     0.03

18-4107 PISTON KIT - Standard Bore

• 2 Cylinder, 18-35Hp Outboards

• Johnson/Evinrude

• 3.000 / std.

18-4127 Piston Kit  -  .030 Oversize

• .030 oversize
• All piston kits include rings, pin and retainers.
• 3.0 / .030 Bore

18-2658 Lower Unit Gear Housing Seal Kit

Seal Kit Contents:

• Part #        Desc.                     O.E. #    Qty.
• 18-0124 Impeller Plate Gasket 325537     1
• 18-0189 Shift Rod Washer    321738         1
• 18-2026 Oil Seal                  321453         2
• 18-2033 Oil Seal                  321928         1
• 18-2065 Oil Seal                  332261         1
• 18-2539 Rubber Seal            328753         1
• 18-4248 Washer                   311598         2
• 18-7100 O-Ring                    301877         1
• 18-7105 O-Ring                    311338         2
• 18-7108 O-Ring                    313893         1
• 18-7109 O-Ring                    317178         3
• 18-7145 O-Ring                    333572         2
• 18-7146 O-Ring                    554545         1
• 18-7180 O-Ring                    303347         1
• 18-2030 Oil Seal                  321786          1
• 18-2027 Oil Seal                  321459          1

433567 Trim Tilt Seal Rebuild Kit, Kit

1989-2005  25HP 35HP 40HP 48HP 50HP with TNT Units

18-7915-1 Oil Filter

• 25-70 HP (1998-2005)

18-4904 Starter Handle and Rope for Johnson/Evinrude

• Sierra Starter Handle and Rope Kit
• Rope size: #4.5
• Sierra part number: 18-4904

18-5629 Starter

Fits OMC 18-40 11 Tooth Drive Gear

Starter For OMC Johnson Evinrude Marine 20 25 28 30 35 40 HP

18-6501 Rewind Spring for Johnson/Evinrude

• Sierra Rewind Spring
• Meets or exceeds the original equipment quality
• Sierra part number: 18-6501
• Interchangeable with the following: Evinrude/Johnson 395460, 307573
• Fit specific, check part numbers to ensure proper fit