Evinrude/Johnson/OMC/BRP 100 HP 1988 Commercial Model 100WMPLT 100WTLM 100WTXM 100WTPLT

Clymer - 1973-1990 CLYMER EVINRUDE/JOHNSON OUTBOARD 48-235 HP SERVICE MANUAL  B736

• Covers 48-235 HP
• 1973-1990
• Shop Manual

SELOC - Johnson/Evinrude Outboards, 1973-91 Repair Manual  #1308

• Covers all 60-235 HP, 3-Cylinder, V4 and V6, 2-Stroke Models, Includes Jet Drives
• 1973-1991
• Repair Manual

18-3059 Impeller

18-3211 Marine Impeller Repair Kit

18-3346 Cup and Plate Assembly

 18-3390 Water Pump Repair Kit Without Housing

18-3391 Water Pump Housing Kit - With Housing

• Sierra Water Pump Kit with Housing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3391
• Interchangeable with the following: GLM 12103, Evinrude/Johnson 395072
• Contains: 18-2557 Impeller Gasket, 18-2704 Grommet, 18-2769 Rubber Seal, (4) 18-3136 Bolt, 18-3153 Bolt, 18-3299 Impeller Key, 18-3346 Cup and Plate Assembly

 18-3392 Water Pump Repair Kit Without Housing

18-3543 Marine Thermostat

• 143 deg farenheigt

Sierra 18-3564 Poppet Relief Valve - V4 Crossflow

• Sierra Poppet Relief Valve
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3564
• Interchangeable with the following: GLM 46170, Evinrude/Johnson 318395

18-3673 Thermostat Kit for V-4 Crossflow

• Sierra Thermostat Kit
• Contains: 18-0675 Thermostat Gasket, 18-0977 Thermostat Gasket, 18-2391 Grommet, 18-3564 Poppet Relief Valve, 18-1243 Valve Springs, 18-3543 Thermostat
• Sierra part number: 18-3673
• Interchangeable with the following: GLM 13270

18-1117 Pinion Bearing

• Sierra Pinion Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1117
• Interchangeable with the following: Chrysler 31-F694057, 31-42647A1, GLM 21610, Evinrude/Johnson 387817, 5007751, Mallory 9-75121, Mercruiser/Mercury 31-42647A1, 31-42647
• Fit specific, check part numbers to ensure proper fit

18-1351 Carrier Needle Bearing

• Sierra Carrier Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1351
• Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407

18-1365 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1365
• Interchangeable with the following: GLM 16330, Evinrude/Johnson 387656, 383248, OMC 387656
• Thrust Driveshaft Johnson/Evinrude 90-250hp OMC Stringer/Cobra All Models

18-1366 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1366
• Interchangeable with the following: GLM 16300, Evinrude/Johnson 382408

18-1370 Thrust Forward Bearing

• Bearing, Thrust Forward Johnson/Evinrude 90-300hp OMCString/Cobraw/1 3/16&1 1/4"
• Replaces: 389042 16340, 18-1370

18-2187 Marine Prop Shaft

18-2216 Sliding Clutch

• Sierra Sliding Clutch
• Meets or exceeds the original equipment quality
• Sierra part number: 18-2216
• Interchangeable with the following: GLM 22625, Evinrude/Johnson 337772, 37774, 334516, 336562, 910995, Mallory 9-72534, OMC 910995, 334516

18-2229 Driveshaft Shim

.003", 1.24 ID

18-3708 Prop Nut & Keeper

18-3715 Marine Prop Nut Kit

Kit Contents:

• 18-3708    398042    Prop Nut/Keeper
• 18-3741    309955    Cotter Pin
• 18-4231    320570    Prop Spacer

18-3741 Marine Cotter Pin

1/8" x 1 3/4"

18-4223 Marine Thrust Washer

18-4231 Marine Prop Spacer

90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)

Fits the following Evinrude Johnson Outboards (15 Spline)

• 90 HP V-4   1995-Newer
• 100 HP V-4 Commercial  1884-Newer
• 115 HP V-4  1995-Newer
• 130 HP V-4  1995 Newer
• 120 - 140 HP V-4  1985
• 140 HP V4  1989-1994
• 150 HP V-6  1978-Newer
• 150 HP V-6 Commercial  1993-Newer
• 155 HP V-6 Commercial  1978-Newer
• 175 HP V-6  1977-Newer
• 185 HP V-6  1984-1985
• 200 HP V-6  1976-Newer
• 225 HP V-6  1986-Newer
• 235 HP V-6  1978-1985
• 250 HP V-6  2001-Newer
• 2.6 Liter V6  1984-1985
• 250 HP V-8  1991-Newer
• 275 HP V-8  1986-1988
• 300 HP V-8  1986-1995
• 3.6 Liter V-8  1986-1987

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)

Other compatible propeller options: 

90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)

90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)

Return to Propellers:

40 - 140 HP Stainless Steel Propellers for Large (4-1/4" Gearcase) and Thru-Hub Exhaust

Fits the following Evinrude Johnson Outboards

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 4-1/4 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
• 40 HP E-TEC  2004-Newer
• 50 HP 2 Cyl  1971-1974
• 50 HP 3 Cy   1994 & 1998
• 50 HP E-TEC 2004-Newer
• 55 HP 3 Cyl  1968-1969
• 55 HP E-TEC 2009-Newer
• 60 HP 3 Cyl  1970-1971, 1986-2001
• 60 HP E-TEC 2004-Newer
• 60 HP 4-Stroke 1998-Newer
• 65 HP 3 Cyl  1972-1973
• 65 HP Pontoon Series  2014-Newer
• 70 HP 3 Cyl  1974-Newer
• 70 HP 4-Stroke  1998-Newer
• 75 HP 3 Cyl  1975-1984
• 75 HP  2004-Newer
• 85 HP  1969-1980, 1991-1995
• 88 HP  1981-Newer
• 90 HP  1981-Newer
• 90 HP E-TEC   2004-Newer
• 100 HP  1979-1980, 1988-Newer
• 110 HP  1986-1989
• 115 HP & 115 HP HO  1973-Newer
• 115 HP E-TEC 2004-Newer
• 120 HP  1986-1994
• 125 HP  1971-1972
• 130 HP E-TEC 2009-2010
• 135 HP  1973-1976
• 140 HP  1977-1984, 1986-1994

• 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
• 45 HP 2 Cyl  1986-1995
• 45 HP 1986-Newer
• 50 HP 2 Cyl  1977-1979
• 55 HP 2 Cyl  1980-Newer
• 60 HP 1971-1974
• 65 HP 1972-1973
• 65 HP 3 Cyl  1984 -2001
• 70 HP 3-Cyl. 1974-2001

BRP Evinrude Viper Stainless Steel for Runabouts and General Recreation

If you want speed, you want the Viper prop.  It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed.  Excellent on any recreational boat, from runabouts and cruisers to deck boats.

• V6 - Standard Rotation
• V4 - Standard Rotation
• Versatile 3-Blade performance
• Excellent balance of speed and durability
• Recommended for runabout, deck/flats, multi-species, offshore and pontoon boats.
• Pressed In Rubber Hub

BRP Evinrude Rogue Stainless Steel for Small Runabouts and Flats Boats

• Provides extra stern lift
• Stays on plane with minimum RPM
• Custom high luster finish
• 4 Blade, Right Rotation
• Pressed In Rubber Hub

BRP Evinrude Raker H.O. for Bass Boats and High Performance

• Set the highest standards in top speed performance
• Maximizes the superior power and torque of Evinrude E-TEC G2 engine
• Superior bow lift
• Vented hub for faster acceleration
• Recommended for multi-species (fiberglass only) bass and sport runabout
• Pressed In Rubber Hub

OMC and Michigan Stainless Steel

• Pressed-In Rubber Hub
• 13 Tooth Spline, 4-1/4 inch gearcase

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Rapture Performance Stainless Steel

• Pressed-In Rubber Hub
• 13 Tooth Spline, 4-1/4 inch gearcase

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Apollo Stainless Steel,  XHS Drop-In Hub

• Michigan "B" Series Propellers Using Michigan XHS 206 or Michigan XHSII 210  Drop-In Hub Kit
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use Michigan XHSII 210  Drop-In Hub Kit.  For all other engines, applications use Michigan XHS 206  Drop-In Hub Kit.

Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210  Drop-In Hub Kit.  For all other engine, applications use XHS 206  Drop-In Hub Kit

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Ballistic High-Performance Stainless Steel

• Michigan "B" Series Propellers Using Michigan XHS 206 or Michigan XHSII 210  Drop-In Hub Kit
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use Michigan XHSII 210  Drop-In Hub Kit.  For all other engines, applications use Michigan XHS 206  Drop-In Hub Kit.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

.

Other compatible propeller options:

40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

Return to Propellers:

40 - 140 HP Aluminum Propellers for Large (4-1/4") Gearcase and Thru-Hub Exhaust

Fits the following Evinrude Johnson Outboards

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 4-1/4 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.

• 40-75 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
• 40 HP E-TEC  2004-Newer
• 50 HP 2 Cyl  1971-1974
• 50 HP 3 Cy   1994 & 1998
• 50 HP E-TEC 2004-Newer
• 55 HP 3 Cyl  1968-1969
• 55 HP E-TEC 2009-Newer
• 60 HP 3 Cyl  1970-1971, 1986-2001
• 60 HP E-TEC 2004-Newer
• 60 HP 4-Stroke 1998-Newer
• 65 HP 3 Cyl  1972-1973
• 65 HP Pontoon Series  2014-Newer
• 70 HP 3 Cyl  1974-Newer
• 70 HP 4-Stroke  1998-Newer
• 75 HP 3 Cyl  1975-1984
• 75 HP  2004-Newer
• 85 HP  1969-1980, 1991-1995
• 88 HP  1981-Newer
• 90 HP  1981-Newer
• 90 HP E-TEC   2004-Newer
• 100 HP  1979-1980, 1988-Newer
• 110 HP  1986-1989
• 115 HP & 115 HP HO  1973-Newer
• 115 HP E-TEC 2004-Newer
• 120 HP  1986-1994
• 125 HP  1971-1972
• 130 HP E-TEC 2009-2010
• 135 HP  1973-1976
• 140 HP  1977-1994

• 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
• 45 HP 2 Cyl  1986-1995
• 45 HP 1986-Newer
• 50 HP 2 Cyl  1977-1979
• 55 HP 2 Cyl  1980-Newer
• 60 HP 1971-1974
• 65 HP 1972-1973
• 65 HP 3 Cyl  1984 -2001
• 70 HP 3-Cyl. 1974-2001

Michigan Vortex Aluminum Props,  XHS Drop-In Hub

• B Series Propellers Using XHS 206 or XHSII 210  Drop-In Hub Kit
• 13 Tooth Spline, 4-1/4 inch Gearcase, Thru-Hub Exhaust
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210  Drop-In Hub Kit.  For all other engine, applications use XHS 206  Drop-In Hub Kit
• Note:  When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

BRP Evinrude/Johnson OMC and Michigan Aluminum Propellers

Note:  When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Other compatible propeller options:

40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

Return to Propellers:

90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust), Right and Left Hand Rotation

Fits the following Evinrude Johnson Outboards (15 Spline)

• 90 HP V-4   1995-Newer
• 100 HP V-4 Commercial  1884-Newer
• 115 HP V-4  1995-Newer
• 130 HP V-4  1995 Newer
• 120 - 140 HP V-4  1985
• 140 HP V4  1989-1994
• 150 HP V-6  1978-Newer
• 150 HP V-6 Commercial  1993-Newer
• 155 HP V-6 Commercial  1978-Newer
• 175 HP V-6  1977-Newer
• 185 HP V-6  1984-1985
• 200 HP V-6  1976-Newer
• 225 HP V-6  1986-Newer
• 235 HP V-6  1978-1985
• 250 HP V-6  2001-Newer
• 2.6 Liter V6  1984-1985
• 250 HP V-8  1991-Newer
• 275 HP V-8  1986-1988
• 300 HP V-8  1986-1995
• 3.6 Liter V-8  1986-1987

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

OMC and Michigan Stainless Steel

Michigan Rapture Performance Stainless Steel

Michigan Ballistic High-Performance Stainless Steel

Other compatible prop options: 

90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)

90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)

Return to Propellers:

BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers

Stainless Steel V6 135-300 HP & 90-130 HP, 25" Shaft, 2-Stroke

• 15 Spline
• TBX Propeller Hub Kit 177283 for Evinrude/Johnson V6 Outboards  Amazon  eBay
•  
• Note:  There is also a TBX Hub Kit that makes these propellers work with  Suzuki / Mercury / Honda / Yamaha  V6 outboards. 177288    Amazon   eBay
•  
• 90 & 115 HP Evinrude® E-TEC®, 25" Shaft, 2004-thru
• 100 HP, 2004-thru
• 100 HP Commercial, 1984-thru
• 120 & 140 HP, 1985
• 130 HP, 1995-1996
• 130 HP Evinrude® E-TEC®, 2009-2010
• 135 HP, 2000-thru
• 140 HP (25"), 1989-thru
• 150 & 155 HP Commercial, 1978-thru
• 150-300 HP, Evinrude® E-TEC®, 2004-thru
• 175 HP, 1977-thru
• 185 HP, 1984-1985
• 200 HP, 1976-thru
• 225 HP, 1986-thru
• 235 HP, 1978-1985
• 2.6 liter, 1984-1985
• 250 HP, 1991-thru
• 275 HP, 1986-1988
• 300 HP, 1988-thru
• 3.6 liter, 1986-1987
• Evinrude® E-TEC® G2, 2015-thru
• Note: All V6 stainless steel propellers, fitted to Evinrude® E-TEC® G2 outboards require an additional purchase of custom fit G2 TBX™ hub kit #767683   Amazon   eBay

Stainless Steel, Stern Drive 15 Spline Propellers

15 Spline
800 Series

• 3.8 - 5.7 Liter, 1978-thru

OMC Cobra®

• 4.3 - 5.7 Liter, 1986-thru

OMC Sea Drive®

• 2.0 - 4.0 Liter, 1982-thru

OMC King Cobra®

• 7.4 - 8.2 Liter, 1990-thru

BRP Evinrude Polished Stainless Steel TBX Propellers

• Uses TBX Interchangeable Hub
• Available in Standard RH Rotation
• Available in Counter LH Rotation

BRP Evinrude Viper TBX Stainless Steel Propellers for Runabouts and General Recreation

If you want speed, you want the Viper prop.  It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed.  Excellent on any recreational boat, from runabouts and cruisers to deck boats.

• Uses TBX Interchangeable Hub
• Available in Standard RH Rotation
• Available in Counter LH Rotation
• Versatile 3-Blade performance
• Excellent balance of speed and durability

BRP Evinrude Cyclone TBX Stainless Steel 4-Blade for Offshore Cruising and Runabouts

When you need a prop that can hold course straight and true in all water conditions, trust the Cyclone prop to maintain compass headings and stay hooked up in big water.  Designed for heavier and twin-engine boats as well as runabouts.

• Uses TBX Interchangeable Hub
• Available in Standard RH Rotation
• Available in Counter LH Rotation
• Ultimate performance 4-blade offshore and runabout propeller
• Stays on plane with minimum RPM
• Tracks true in all water conditions
• Less vibrations and improved fuel economy

BRP Evinrude Rebel TBX Stainless Steel 3-Blade Props for Offshore Cruising

The Rebel propeller is designed and engineered to deliver improved midrange cruising and top-end performance on V6 Evinrude E-TEC.  Large diameter and efficient blade contour provide faster speeds at lower RPMs to deliver significant improvement in fuel economy.  You will get more miles to the gallon and a longer cruising range.  Standard rotation and counter-rotation models are available from 15 to 25-inch pitch.  Use the Rebel propeller on offshore boats, large runabouts, and even large pontoon boats to make them perform to their maximum potential.

• Uses TBX Interchangeable Hub
• Available in Standard RH Rotation
• Available in Counter LH Rotation
• High polish stainless steel
• Designed and engineered for efficient midrange cruising
• Improved fuel economy with a longer cruising range
• Use on offshore boats, large runabouts, and pontoon boats.

BRP Evinrude Raker H.O. Propellers for Bass Boats and High Performance

Looking to plane fast - and run faster?  The Raker II prop is specially designed for building up the engine RPMs and getting you on plane faster.  A great prop in surfacing conditions, especially when the boat is running over 50 mph.  Perfect for bass boats and high-performance boats.  The Raker propeller utilizes vent holes in the outer exhaust hub to allow exhaust gases to ventilate the blade area.  This allows the engine to build up RPMs and get the boat on plane faster.  At higher speeds, the water from rushing past the hub blocks these vent holes, preventing. them from ventilating the blades.  V6 Raker II use the TBX hub system

• Fast, Fast, Fast
• Uses the TBX hub system
• Custom cupped high rake blades provide superior bow lift and exceptional top-end speed
• Special vent holes for powerful acceleration
• Set the highest standards in top speed performance
• Maximizes the superior power and torque of Evinrude E-TEC G2 engine

Other compatible propeller options:

BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, Aluminum Propellers

BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers

Return to Propellers:

BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke, Aluminum Propellers

Evinrude/Johnson Aluminum Props

-More Performance for the Money!  Evinrude/Johnson props are cast with a custom aluminum alloy to give them greater strength and longer life than ordinary propellers.  Many of the Evinrude/Johnson outboards are speed cupped for better top-end performance.  Special baked-on corrosion-resistant paint gives added protection against saltwater and galvanic corrosion.

• Precision casting provides greater strength and longer life
• Baked-on corrosion-resistant paint gives added protection
• Engineered to match the power curve of your outboard for superior performance.

V6 Outboard 150-300 HP & 90 - 300 HP, 25" Shaft, 2-Stroke

• 15 Spline
• TBX Propeller Hub Kit 765195  Amazon  eBay for Evinrude/Johnson props with Interchangeable Hub 
• Other TBX Propeller Kits available competitive brands.
•  
• 90 & 115 HP Evinrude® E-TEC®, 25" Shaft, 2004-thru
• 100 HP, 2004-thru
• 100 HP Commercial, 1984-thru
• 120 & 140 HP, 1985
• 130 HP, 1995-1996
• 130 HP Evinrude® E-TEC®, 2009-2010
• 135 HP, 2000-thru
• 140 HP (25"), 1989-thru
• 150 & 155 HP Commercial, 1978-thru
• 150-300 HP, Evinrude® E-TEC®, 2004-thru
• 175 HP, 1977-thru
• 185 HP, 1984-1985
• 200 HP, 1976-thru
• 225 HP, 1986-thru
• 235 HP, 1978-1985
• 2.6 liter, 1984-1985
• 250 HP, 1991-thru
• 275 HP, 1986-1988
• 300 HP, 1988-thru
• 3.6 liter, 1986-1987
• Evinrude® E-TEC® G2, 2015-thru

V6 Stern Drive 15 Spline Propellers

15 Spline
800 Series

• 3.8 - 5.7 Liter, 1978-thru

OMC Cobra®

• 4.3 - 5.7 Liter, 1986-thru

OMC Sea Drive®

• 2.0 - 4.0 Liter, 1982-thru

OMC King Cobra®

• 7.4 - 8.2 Liter, 1990-thru

Other compatible propeller options:

BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Aluminum Propellers

BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers

Return to Propellers:

6211188  Starter Drive Assembly

• Fits: 9.9/15 4-Stroke, (1997 & up)
• Fits 85 thru 115 (1973-1999) Crossflow  - (Sierra 18-5634, OEM 586283, 584613 Starter)

18-5697 Starter Brush and Spring Set

• Sierra Brush and Spring Set
• Meets or exceeds the original equipment quality
• Sierra part number: 18-5697
• Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384

Power Trim Relay 586224 582472 584416 18-5705 Johnson Evinrude OMC

583408 582399 Regulator Rectifier

• Replace: 582399, 583408, CDI 153-3408, Sierra 18-5708
• 3 Wires for Outboard Evinrude Johnson
• Three months warranty.

18-5808 STARTER SOLENOID

18-7046 Carburetor Kit

18-4303 Sierra Powerhead Gasket Set

• Gasket Kit, Powerhead Johnson/Evinrude V4 Crossflow 1977-1992
• Replaces: 439085,391300 18-4303-1, 389556, 39080, 391300, 439085, 9-64112

Gasket Set Contents:

• 18-0850 Fuel Pump Mtg Gasket  303615             1
• 18-2876 By-Pass Cover Gasket  307133             4
• 18-2866 Exhaust Cover Gasket  317914             2
• 18-0953 Water Passage Gasket  317951            1
• 18-0117 Exhaust Plate Gasket   317995             1
• 18-2873 Gasket                         318335             2
• 18-2956 Water Jacket Head Gasket 318358         2
• 18-2867 Manifold to Crankcase Gasket 319174    1
• 18-2857 Air Silencer to Carb. Gasket  386573, 319771         2
• 18-0985 Air Silencer Gasket             321722        1
• 18-2864 Adapter to Powerhead Gasket 321727     1
• 18-0991 Leaf Plate Gasket              321907           4
• 18-2547 Water Pass.Cover Gasket  322858          1
• 18-0102 Exhaust ManifoldGasket    323469           1
• 18-0134 Intake Plate Gasket          326926           1
• 18-0977 Thermostat Gasket           332369           2

18-2001 Oil Seal

18-2595 GASKET SET,SHIFT ROD & WEAR PLTE

18-2956 Head Gasket

 18-3898 Low Compression Head Gasket

• Sierra Head Gasket
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3898
• Interchangeable with the following: GLM 35650, Evinrude/Johnson 332819

18-8307 Lower Main Seal

• Sierra Lower Main Seal
• Meets or exceeds the original equipment quality
• Sierra part number: 18-8307
• Interchangeable with the following: GLM 86790, Evinrude/Johnson 0331103
• OD.: 1.628"; Shaft Size: 1.110"; Width: 0.448"

18-5176 Ignition Coil

18-5179 Ignition Plug In Coil

582262 Power Pack

Champion 876M Spark Plug QL16V

• Plug Gap 0.30

Sierra 18-1353 Center Main Bearing

• Sierra Center Main Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1353
• Interchangeable with the following: GLM 22810, Evinrude/Johnson 5007190, 387041

18-1374 Wrist Pin Bearing

• Sierra Wrist Pin Rod
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1374
• Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217

18-1377 Center Main Bearing

• Sierra Center Main Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1377
• Interchangeable with the following: GLM 22710, Evinrude/Johnson 352960, 320499

18-3904 Marine Piston Ring

3.500 inch Standard Bore

18-3905 Marine Piston Ring

• 4 and 6 cylinder
• 3.53 inch bore (.03 oversize)
• OMC 396504

18-4040 Marine Needle Bearing

18-4075 Connecting Rod Bolt

• Replaces OEM part # 308186

18-4100 Piston Kit  .030 Oversize

• 3.53 inch (.03 oversize)
• OMC 396585, 396588
• GLM Part Number: 24030; Sierra Part Number: 18-4100; OMC Part Number: 5006669

18-4110 Piston

• 4 and 6 Cylinder
• 3.52 inch bore size (.02 oversize)

18-4120 Piston Kit - Standard Bore

• Sierra Piston Kit
• 85-300 HP, 4 and 6 cylinder
• Bore Size: 3.500 (Standard Bore)
• Sierra part number: 18-4120
• Interchangeable with the following: GLM 24010, Evinrude/Johnson 393271, 393924, 5006658. 5006661, Mallory 9-53420, Wiseco 3073PS, 3173PS
• Fit specific, check part numbers to ensure proper fit

Sierra 18-1361 Rod Crank End Bearing

• ierra Rod Crank End Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1361
• Interchangeable with the following: GLM 22820, Evinrude/Johnson 387787, Mallory 9-51100
• Fit specific, check part numbers to ensure proper fit

Sierra 18-1386 Powerhead Bearing Kit

• Sierra Powerhead Bearing Kit
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1386
• Contains the following: 18-1353 Center Main Bearing, 18-1377 Center Main Bearing, 18-1374 Wrist Pin Bearing, 18-1395 Lower Crankshaft Bearing, 18-1361 Rod Crank Bearing

18-1395 Lower Crankshaft Bearing

• Sierra Lower Crankshaft Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1395
• Interchangeable with the following: Evinrude/Johnson 385503, Mallory 9-51106

18-3906 Marine Piston Ring

• 3.53 inch (.03 oversize)

18-2623 Lower Unit Seal Kit

Note:  2004-AB E-TEC - Non SLE gearcase only

Complete Lower Unit Seal Kit for Johnson Evinrude V4, V6, V8

18-2623 is an equivalent to an earlier OEM number 439141 (this number is no longer available from the OEM, now 439141 supersedes to part number 5006373).

18-8384 is equivalent to 5006373 (neither of these is equivalent to the 18-2623)

The OEM part 18-8384 and 5006373 are used to replace all earlier part numbers including the 18-2623, while the 18-2623 and 439141 are limited models that call for this specific number or an earlier number that supersedes up to OEM number 439141.

Seal Kit Contents
Part #    Desc.          O.E. #       Qty.
18-0110 Shift Housing Gasket 314082 1
18-2001 Seal 330137 2
18-2002 Seal 320862 2
18-2026 Seal 321453 2
18-2061 Seal 329922 1
18-2062 Seal 329923 1
18-2377 Screw 316563 4
18-2378 Magnetic Drain Screw 318544 1
18-2536 O-Ring 315788 1
18-2557 Impeller Gasket 338484 1
18-4248 Washer 311598 2
18-7109 O-Ring 317178 1
18-7120 O-Ring 307853 1
18-7127 O-Ring 313446 1
18-7130 O-Ring 314728 1
18-7133 O-Ring 305123 2
18-7137 O-Ring 318372 2
18-7142 O-Ring 322119 1
18-7144 O-Ring 333572 3
18-7145 O-Ring 332584 1
18-7475 Washer 328743 4
18-8300 Seal 341280 1
18-8301 Seal 341281 1

Sierra Marine Lower Unit Seal Kit is equivalent to parts:

• 439141 Evinrude Johnson OMC BRP
• 9-74106 Mallory Marine

18-7111 O-Ring

ID: 0.197, Width 0.113

18-7133 Marine O-Ring

ID: 3.780, Width: 0.135

18-7142 Marine O-Ring

ID: 3.940, Width: 0.135

18-7475 O-Ring

ID: 0.250, Width: 0.065

18-2002 Oil Seal

Size: 1.188, OD: 1.692, Width: .250

18-2061 Marine Oil Seal

Size: 0.822, OD: 1.375, Width: 0.195

18-2062 Marine Oil Seal

Size: 0.875, OD: 1.375, Width: 0.207

18-2074 Oil Seal

Size: 1.625, OD: 2.125, Width: 0.250

18-5634 Starter for V4 Crossflows