Evinrude/Johnson/OMC/BRP 65 HP 1984 Commercial Model 65RSLV 65RSYV 65RWLCR 65TELCR 65WTLCR

Clymer - 1973-1990 CLYMER EVINRUDE/JOHNSON OUTBOARD 48-235 HP SERVICE MANUAL  B736

• Covers 48-235 HP
• 1973-1990
• Shop Manual

SELOC - Johnson/Evinrude Outboards, 1973-91 Repair Manual  #1308

• Covers all 60-235 HP, 3-Cylinder, V4 and V6, 2-Stroke Models, Includes Jet Drives
• 1973-1991
• Repair Manual

18-3053 Sierra Impeller

Note:  40 HP Commercial 1995-2001 (RP, RW models only)

18-3127 Sierra Impeller Plate

18-3129 Water Pump Housing

 18-3387 Water Pump Repair Kit Without Housing

 18-3389 Water Pump Repair Kit With Housing

Note:  Use this entire re-designed kit to replace 386165 Impeller.

18-3557 Thermostat

143 deg

 18-3669 Thermostat Kit

• The Sierra 18-3669 Thermostat Kit is interchangeable with the following: GLM 13450. Contains : (1) 18-0929 Thermostat Gasket, (1) 18-2548 Thermostat Cover Gasket, (1) 18-3557 Thermostat.
• Sierra Thermostat Kit
• Contains : (1) 18-0929 Thermostat Gasket, (1) 18-2548 Thermostat Cover Gasket, (1) 18-3557 Thermostat
• Sierra part number: 18-3669
• Interchangeable with the following: GLM 13450

18-1154 Marine Ball Bearing

18-1350 Carrier Needle Bearing

• Sierra Carrier Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1350
• Interchangeable with the following: GLM 22860, Evinrude/Johnson 379504, OMC 379504

18-1351 Carrier Needle Bearing

• Sierra Carrier Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1351
• Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407

18-1356 Pinion Gear Bearing

18-1366 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1366
• Interchangeable with the following: GLM 16300, Evinrude/Johnson 382408

18-1367 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1367
• Interchangeable with the following: GLM 16320, Evinrude/Johnson 385068

18-2232 Driveshaft Shim

.003", 1.22 ID

18-2233 Driveshaft Shim

.004", 1.22" ID

18-2234 Driveshaft Shim

.005", 1.22 ID

18-2250  Propeller Shaft

18-3705 Marine Prop Nut

18-3716 Marine Prop Nut Kit

Prop Kit Contents:

• Part #      O.E.#   Description
• 18-3705  314503   Prop Nut
• 18-3742  314502   Cotter Pin
• 18-4228  315810   Prop Spacer

18-3742 Marine Cotter Pin

• Sierra Cotter Pin
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3742-9
• Interchangeable with the following: GLM 22120, Evinrude/Johnson 314502, OMC 314502
• Size: 1/8 x 1-1/4"

18-4222 Thrust Washer

18-4232 Marine Prop Spacer

40 - 140 HP Stainless Steel Propellers for Large (4-1/4" Gearcase) and Thru-Hub Exhaust

Fits the following Evinrude Johnson Outboards

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 4-1/4 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
• 40 HP E-TEC  2004-Newer
• 50 HP 2 Cyl  1971-1974
• 50 HP 3 Cy   1994 & 1998
• 50 HP E-TEC 2004-Newer
• 55 HP 3 Cyl  1968-1969
• 55 HP E-TEC 2009-Newer
• 60 HP 3 Cyl  1970-1971, 1986-2001
• 60 HP E-TEC 2004-Newer
• 60 HP 4-Stroke 1998-Newer
• 65 HP 3 Cyl  1972-1973
• 65 HP Pontoon Series  2014-Newer
• 70 HP 3 Cyl  1974-Newer
• 70 HP 4-Stroke  1998-Newer
• 75 HP 3 Cyl  1975-1984
• 75 HP  2004-Newer
• 85 HP  1969-1980, 1991-1995
• 88 HP  1981-Newer
• 90 HP  1981-Newer
• 90 HP E-TEC   2004-Newer
• 100 HP  1979-1980, 1988-Newer
• 110 HP  1986-1989
• 115 HP & 115 HP HO  1973-Newer
• 115 HP E-TEC 2004-Newer
• 120 HP  1986-1994
• 125 HP  1971-1972
• 130 HP E-TEC 2009-2010
• 135 HP  1973-1976
• 140 HP  1977-1984, 1986-1994

• 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
• 45 HP 2 Cyl  1986-1995
• 45 HP 1986-Newer
• 50 HP 2 Cyl  1977-1979
• 55 HP 2 Cyl  1980-Newer
• 60 HP 1971-1974
• 65 HP 1972-1973
• 65 HP 3 Cyl  1984 -2001
• 70 HP 3-Cyl. 1974-2001

BRP Evinrude Viper Stainless Steel for Runabouts and General Recreation

If you want speed, you want the Viper prop.  It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed.  Excellent on any recreational boat, from runabouts and cruisers to deck boats.

• V6 - Standard Rotation
• V4 - Standard Rotation
• Versatile 3-Blade performance
• Excellent balance of speed and durability
• Recommended for runabout, deck/flats, multi-species, offshore and pontoon boats.
• Pressed In Rubber Hub

BRP Evinrude Rogue Stainless Steel for Small Runabouts and Flats Boats

• Provides extra stern lift
• Stays on plane with minimum RPM
• Custom high luster finish
• 4 Blade, Right Rotation
• Pressed In Rubber Hub

BRP Evinrude Raker H.O. for Bass Boats and High Performance

• Set the highest standards in top speed performance
• Maximizes the superior power and torque of Evinrude E-TEC G2 engine
• Superior bow lift
• Vented hub for faster acceleration
• Recommended for multi-species (fiberglass only) bass and sport runabout
• Pressed In Rubber Hub

OMC and Michigan Stainless Steel

• Pressed-In Rubber Hub
• 13 Tooth Spline, 4-1/4 inch gearcase

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Rapture Performance Stainless Steel

• Pressed-In Rubber Hub
• 13 Tooth Spline, 4-1/4 inch gearcase

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Apollo Stainless Steel,  XHS Drop-In Hub

• Michigan "B" Series Propellers Using Michigan XHS 206 or Michigan XHSII 210  Drop-In Hub Kit
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use Michigan XHSII 210  Drop-In Hub Kit.  For all other engines, applications use Michigan XHS 206  Drop-In Hub Kit.

Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210  Drop-In Hub Kit.  For all other engine, applications use XHS 206  Drop-In Hub Kit

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Ballistic High-Performance Stainless Steel

• Michigan "B" Series Propellers Using Michigan XHS 206 or Michigan XHSII 210  Drop-In Hub Kit
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use Michigan XHSII 210  Drop-In Hub Kit.  For all other engines, applications use Michigan XHS 206  Drop-In Hub Kit.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

.

Other compatible propeller options:

40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

Return to Propellers:

40 - 75 HP Aluminum Propellers for Small 3-3/8" Gearcase (Thru-Hub Exhaust), 13 Tooth Spline

For Evinrude Johnson OMC BRP, 13 Tooth Spline

• 40-75 HP (Small Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 3-3/8 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.
•  
• 40 HP, 2 Cyl, 1984 - 2005
• 48 HP, 1987-1996
• 50 HP, 2 Cyl, 1975 - 2005
• 55 HP, 2 Cyl, 1976-1979
• 60 HP 2 Cyl, 1980-1985
• 65 HP, 2 Cyl, 1980-1985
• 75 HP, 3 Cyl, 1975-1985
• Sprint/Formula E  1986-1992

Sorted by Pitch. 

Pitch is how far, in inches,  the boat would travel with 1 prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

OMC and Michigan Aluminum Propellers

Michigan Vortex Aluminum Props,  XHS Drop-In Hub

• C Series Propellers Using XHS 111 or XHSII 221 Drop-In Hub Kit
• 13 Tooth Spline, 3-3/8 inch Gearcase, Thru-Hub Exhaust

40 - 75 HP Evinrude Johnson BRP Aluminum Propellers for Small 3-3/8" Gearcase (Thru-Hub Exhaust)

40 - 75 HP Evinrude Johnson BRP Stainless Steel Propellers for Small 3-3/8" Gearcase (Thru-Hub Exhaust)

Return to Propellers:

40 - 140 HP Aluminum Propellers for Large (4-1/4") Gearcase and Thru-Hub Exhaust

Fits the following Evinrude Johnson Outboards

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 4-1/4 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.

• 40-75 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
• 40 HP E-TEC  2004-Newer
• 50 HP 2 Cyl  1971-1974
• 50 HP 3 Cy   1994 & 1998
• 50 HP E-TEC 2004-Newer
• 55 HP 3 Cyl  1968-1969
• 55 HP E-TEC 2009-Newer
• 60 HP 3 Cyl  1970-1971, 1986-2001
• 60 HP E-TEC 2004-Newer
• 60 HP 4-Stroke 1998-Newer
• 65 HP 3 Cyl  1972-1973
• 65 HP Pontoon Series  2014-Newer
• 70 HP 3 Cyl  1974-Newer
• 70 HP 4-Stroke  1998-Newer
• 75 HP 3 Cyl  1975-1984
• 75 HP  2004-Newer
• 85 HP  1969-1980, 1991-1995
• 88 HP  1981-Newer
• 90 HP  1981-Newer
• 90 HP E-TEC   2004-Newer
• 100 HP  1979-1980, 1988-Newer
• 110 HP  1986-1989
• 115 HP & 115 HP HO  1973-Newer
• 115 HP E-TEC 2004-Newer
• 120 HP  1986-1994
• 125 HP  1971-1972
• 130 HP E-TEC 2009-2010
• 135 HP  1973-1976
• 140 HP  1977-1994

• 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
• 45 HP 2 Cyl  1986-1995
• 45 HP 1986-Newer
• 50 HP 2 Cyl  1977-1979
• 55 HP 2 Cyl  1980-Newer
• 60 HP 1971-1974
• 65 HP 1972-1973
• 65 HP 3 Cyl  1984 -2001
• 70 HP 3-Cyl. 1974-2001

Michigan Vortex Aluminum Props,  XHS Drop-In Hub

• B Series Propellers Using XHS 206 or XHSII 210  Drop-In Hub Kit
• 13 Tooth Spline, 4-1/4 inch Gearcase, Thru-Hub Exhaust
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210  Drop-In Hub Kit.  For all other engine, applications use XHS 206  Drop-In Hub Kit
• Note:  When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

BRP Evinrude/Johnson OMC and Michigan Aluminum Propellers

Note:  When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Other compatible propeller options:

40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

Return to Propellers:

Sierra International 18-5678 Marine Starter Drive Assembly for Johnson/Evinrude Outboard Motor

For Sierra 18-5624, 18-5630, 18-5648, OEM 586279, 586281, 586281 Starters

18-5808 STARTER SOLENOID

18-7042 Siearra Carb Kit

Note: 25, 35 HP 1995-Up Except 3 Cylinder Models

18-7093 Sierra Carburetor Needle and Seat

18-7222 Sierra Carb Kit With Float

18-7820 Fuel Pump Kit 

• Sierra Fuel Pump Kit
• Contains 18-0850 Fuel Pump Gasket, 18-2900 Cap to Fuel Pump Gasket
• Sierra part number: 18-7820
• Interchangeable with the following: GLM 40820, Evinrude/Johnson 393103, Mallory 9-37702

18-4321 Powerhead Gasket Set

• Sierra Powerhead Gasket Set
• Meets or exceeds the original equipment quality
• Sierra part number: 18-4321
• Interchangeable with the following: GLM 39390, Evinrude/Johnson 438904, 398047, Mallory 9-64101

Gasket Set Contents:

• 18-0118 Carburetor Gasket  325092        3
• 18-0989 Air Silencer Gasket  321794         1
• 18-0975 Carb to Silencer Gasket 333008     1
• 18-3836 Head Gasket                329836       1
• 18-1202 Thermostat Cover Gasket 329830   1
• 18-1205 Adapter Gasket               329828     1
• 18-1207 Exhaust Manifold Gask 329833, 343863  1
• 18-1212 Intake Manifold Gasket    326926       1
• 18-1219 Grommet                        320880       1
• 18-1221 Retainer                          330273      1

Note 65 HP 1972-1973 use 313413 Head Gasket, plus

18-2001 Oil Seal

18-2960 Head Gasket

 Champion (5828) Stainless Steel Marine Plug Spark Plug

• Unique anti-fouling design
• Engineered to exceed OE designs
• Maximum durability
• Designed for easy starting

18-5176 Ignition Coil

Sierra International 18-5760 Marine Power Pack

Champion 828M Spark Plug Ql77JC4

Also see:  Champion (5828) Stainless Steel Marine Plug Spark Plug

Also Fits Mercury Outboard

• 280 HP 2002 Offshore  2.5L EFI
• 280 HP 2002 Sport, SS 2.5L EFI
• 18 HP 1985-1980
• 9.8 HP 1985-1979
• 7.5 HP 1985-1979

Champion L77JC4 (821M) Copper Plus Small Engine Spark Plug

• .030 Gap

See Also:  Champion (5828) Stainless Steel Marine Plug Spark Plug

13-1872 Upper Main Bearing

CAGED BEARING KIT

• GLM Part Number: 22800; Sierra Part Number: 18-1352; Mercury Part Number: 31-67445; OMC Part Number: 378252
• Metal Cage 16 NEEDLES
• 1.375 Journal Size 40C (1974-Thru) 45-60HP 2-Cyl. (1971-Thru) 3-Cyl. (All) V4 (1962-1978)

18-1374 Wrist Pin Bearing

• Sierra Wrist Pin Rod
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1374
• Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217

18-1378 Rod Bearing Complete

Johnson/Evinrude Rod Bearing for (18-135HP) Outboard

18-4040 Marine Needle Bearing

18-4075 Connecting Rod Bolt

• Replaces OEM part # 308186

18-2660 Marine Lower Unit Seal Kit

Note:  50 and 60 HP - 3 Cylinder Only

Seal Kit Contents:

• Part #      Desc.    O.E. # Qty.
• 18-2059 Oil Seal 321466   1
• 18-2064 Oil Seal 332205   1
• 18-2537 Rubber Seal 324937 1
• 18-2855 Shift Housing Cover to Gearcase Gasket 314082 1
• 18-4248 Washer 311598 2
• 18-7120 O-Ring 307853 1
• 18-7127 O-Ring 313446 1
• 18-7128 O-Ring 313754 1
• 18-7137 O-Ring 318372 1
• 18-7145 O-Ring 333572 2
• 18-7475 Quad Ring 332584 4
• 18-7174 O-Ring 910582, 326649 1
• 18-2001 Oil Seal 330137 2

18-8383 Lower Unit Seal Kit

For E-Tec 40, 50, 60 HP

18-7111 O-Ring

ID: 0.197, Width 0.113

18-7137 Marine O-Ring

ID: 0.320, Width: 0.155

18-0543 Oil Seal

• OD: 1.926", Shaft: 1.540", Width: 0.243"

18-2059 Marine Oil Seal for OMC

Size: 0.750, OD: 1.126, Width: 0.200