- Covers 48-235 HP
- 1973-1990
- Shop Manual
________________________________________________________________________________________
- Covers all 60-235 HP, 3-Cylinder, V4 and V6, 2-Stroke Models, Includes Jet Drives
- 1973-1991
- Repair Manual
________________________________________________________________________________________
18-3053 Sierra Impeller
Note: 40 HP Commercial 1995-2001 (RP, RW models only)
________________________________________________________________________________________
18-3127 Sierra Impeller Plate
________________________________________________________________________________________
18-3129 Water Pump Housing
________________________________________________________________________________________
18-3387 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
18-3389 Water Pump Repair Kit With Housing
Note: Use this entire re-designed kit to replace 386165 Impeller.
________________________________________________________________________________________
18-3557 Thermostat
143 deg
________________________________________________________________________________________
18-3669 Thermostat Kit
- The Sierra 18-3669 Thermostat Kit is interchangeable with the following: GLM 13450. Contains : (1) 18-0929 Thermostat Gasket, (1) 18-2548 Thermostat Cover Gasket, (1) 18-3557 Thermostat.
- Sierra Thermostat Kit
- Contains : (1) 18-0929 Thermostat Gasket, (1) 18-2548 Thermostat Cover Gasket, (1) 18-3557 Thermostat
- Sierra part number: 18-3669
- Interchangeable with the following: GLM 13450
________________________________________________________________________________________
18-1154 Marine Ball Bearing
________________________________________________________________________________________
18-1350 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1350
- Interchangeable with the following: GLM 22860, Evinrude/Johnson 379504, OMC 379504
________________________________________________________________________________________
18-1351 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1351
- Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407
________________________________________________________________________________________
18-1354 Needle Bearing
- Sierra Needle Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1354
- Interchangeable with the following: GLM 22890, Evinrude/Johnson 386764
________________________________________________________________________________________
18-1355 Aft Outside Carrier Needle Bearing
GLM Part Number: 22900; Sierra Part Number: 18-1355; OMC Part Number: 386765
________________________________________________________________________________________
________________________________________________________________________________________
18-1366 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1366
- Interchangeable with the following: GLM 16300, Evinrude/Johnson 382408
________________________________________________________________________________________
18-1367 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1367
- Interchangeable with the following: GLM 16320, Evinrude/Johnson 385068
________________________________________________________________________________________
18-1371 Thrust Forward Bearing
- Sierra Thrust Forward Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1371
- Interchangeable with the following: GLM 16310, Evinrude/Johnson 385043, OMC 385043, 3852221
________________________________________________________________________________________
18-2207 Marine Forward Gear Set
Forward and pinion gears
OMC Part Number 397338
________________________________________________________________________________________
18-2208 Marine Reverse Gear
________________________________________________________________________________________
18-2209 Marine Sliding Clutch
________________________________________________________________________________________
18-2210 Gear Set
Gear Set Contains:
________________________________________________________________________________________
18-2224 Driveshaft Shim
.003", 1.58" ID
________________________________________________________________________________________
18-2225 Driveshaft Shim
.004", 1.56" ID
________________________________________________________________________________________
18-2226 Driveshaft Shim
.005", 1.53" ID
________________________________________________________________________________________
18-2227 Driveshaft Shim
.006", 1.53 ID
________________________________________________________________________________________
18-2228 Driveshaft Shim
.007", 1.53 ID
________________________________________________________________________________________
________________________________________________________________________________________
18-2287 Clutch Dog
- Sierra Clutch Dog
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2287
- Interchangeable with the following: GLM 22683, Evinrude/Johnson 319895
________________________________________________________________________________________
For: 35, 40, 48, 50, 55, 60, 70, 75 HP 2 & 3 cyl outboards (1975-1987)
________________________________________________________________________________________
________________________________________________________________________________________
18-3716 Marine Prop Nut Kit
Prop Kit Contents:
- Part # O.E.# Description
- 18-3705 314503 Prop Nut
- 18-3742 314502 Cotter Pin
- 18-4228 315810 Prop Spacer
________________________________________________________________________________________
18-3742 Marine Cotter Pin
- Sierra Cotter Pin
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3742-9
- Interchangeable with the following: GLM 22120, Evinrude/Johnson 314502, OMC 314502
- Size: 1/8 x 1-1/4"
________________________________________________________________________________________
________________________________________________________________________________________
18-4232 Marine Prop Spacer
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 4-1/4 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
- 40 HP E-TEC 2004-Newer
- 50 HP 2 Cyl 1971-1974
- 50 HP 3 Cy 1994 & 1998
- 50 HP E-TEC 2004-Newer
- 55 HP 3 Cyl 1968-1969
- 55 HP E-TEC 2009-Newer
- 60 HP 3 Cyl 1970-1971, 1986-2001
- 60 HP E-TEC 2004-Newer
- 60 HP 4-Stroke 1998-Newer
- 65 HP 3 Cyl 1972-1973
- 65 HP Pontoon Series 2014-Newer
- 70 HP 3 Cyl 1974-Newer
- 70 HP 4-Stroke 1998-Newer
- 75 HP 3 Cyl 1975-1984
- 75 HP 2004-Newer
- 85 HP 1969-1980, 1991-1995
- 88 HP 1981-Newer
- 90 HP 1981-Newer
- 90 HP E-TEC 2004-Newer
- 100 HP 1979-1980, 1988-Newer
- 110 HP 1986-1989
- 115 HP & 115 HP HO 1973-Newer
- 115 HP E-TEC 2004-Newer
- 120 HP 1986-1994
- 125 HP 1971-1972
- 130 HP E-TEC 2009-2010
- 135 HP 1973-1976
- 140 HP 1977-1984, 1986-1994
- 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
- 45 HP 2 Cyl 1986-1995
- 45 HP 1986-Newer
- 50 HP 2 Cyl 1977-1979
- 55 HP 2 Cyl 1980-Newer
- 60 HP 1971-1974
- 65 HP 1972-1973
- 65 HP 3 Cyl 1984 -2001
- 70 HP 3-Cyl. 1974-2001
BRP Evinrude Viper Stainless Steel for Runabouts and General Recreation
If you want speed, you want the Viper prop. It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed. Excellent on any recreational boat, from runabouts and cruisers to deck boats.
- V6 - Standard Rotation
- V4 - Standard Rotation
- Versatile 3-Blade performance
- Excellent balance of speed and durability
- Recommended for runabout, deck/flats, multi-species, offshore and pontoon boats.
- Pressed In Rubber Hub
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
15 |
BRP 763929 |
Amazon |
eBay |
13 7/8 x 15, RH, 3-Blade, SS |
17 |
BRP 763930 |
Amazon |
eBay |
13 7/8 x 17, RH, 3-Blade, SS |
19 |
BRP 763931 |
Amazon |
eBay |
13 7/8 x 19, RH, 3-Blade, SS |
21 |
BRP 763932 |
Amazon |
eBay |
13 7/8 x 21, RH, 3-Blade, SS |
BRP Evinrude Rogue Stainless Steel for Small Runabouts and Flats Boats
- Provides extra stern lift
- Stays on plane with minimum RPM
- Custom high luster finish
- 4 Blade, Right Rotation
- Pressed In Rubber Hub
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
13 |
BRP 763964 |
Amazon |
eBay |
13 1/2 x 13, RH, 3-Blade, SS |
15 |
BRP 763965 |
Amazon |
eBay |
13 1/4 x 15, RH, 3-Blade, SS |
17 |
BRP 763966 |
Amazon |
eBay |
13 x 17, RH, 3-Blade, SS |
19 |
BRP 763967 |
Amazon |
eBay |
13 x 19, RH, 3-Blade, SS |
21 |
BRP 763968 |
Amazon |
eBay |
13 x 21, RH, 3-Blade, SS |
BRP Evinrude Raker H.O. for Bass Boats and High Performance
- Set the highest standards in top speed performance
- Maximizes the superior power and torque of Evinrude E-TEC G2 engine
- Superior bow lift
- Vented hub for faster acceleration
- Recommended for multi-species (fiberglass only) bass and sport runabout
- Pressed In Rubber Hub
OMC and Michigan Stainless Steel
- Pressed-In Rubber Hub
- 13 Tooth Spline, 4-1/4 inch gearcase
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
13 |
BRP 763957 |
Amazon |
eBay |
13-3/4 x 13 Right 3-Blade
|
15 |
BRP 763950 |
Amazon |
eBay |
13-3/8 x 15, Right, 3-Blade |
15 |
OMC 389949 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 013028 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
BRP 763951 |
Amazon |
eBay |
13-1/4 x 17, Right, 3-Blade |
17 |
OMC 389948 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 013030 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
BRP 763952 |
Amazon |
eBay |
13-1/8 x 19, Right, 3-Blade |
19 |
OMC 389510 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 013033 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
OMC 389512 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 013034 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
Michigan Rapture Performance Stainless Steel
- Pressed-In Rubber Hub
- 13 Tooth Spline, 4-1/4 inch gearcase
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 013076 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
16 |
Michigan 063042 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
Michigan 013077 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 063043 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
Michigan 013078 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 063044 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
Michigan 013079 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 063045 |
Amazon |
eBay |
14-16 foot boats, Light Loads |
Michigan Apollo Stainless Steel, XHS Drop-In Hub
Note: For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210 Drop-In Hub Kit. For all other engine, applications use XHS 206 Drop-In Hub Kit
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 993143 |
Amazon |
eBay |
13-3/8 x 15, Right, 3 Blade |
15 Left |
Michigan 993153 |
Amazon |
eBay |
13-3/8 x 15, Left, 3 Blade |
17 |
Michigan 993144 |
Amazon |
eBay |
13-1/4 x 17, Right, 3 Blade |
17 Left |
Michigan 993154 |
Amazon |
eBay |
13-1/4 x 17, Left, 3 Blade |
19 |
Michigan 993145 |
Amazon |
eBay |
13-1/8 x 19, Right, 3 Blade |
19 Left |
Michigan 993155 |
Amazon |
eBay |
13-1/8 x 19, Left, 3 Blade |
21 |
Michigan 993146 |
Amazon |
eBay |
13 x 21, Right, 3 Blade |
21 Left |
Michigan 993156 |
Amazon |
eBay |
13 x 21, Right, 3 Blade |
Michigan Ballistic High-Performance Stainless Steel
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 933415 |
Amazon |
eBay |
13-5/8 x 15, Right, 3-Blade |
15 |
Michigan 335030 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
Michigan 933417 |
Amazon |
eBay |
13-1/2 x 17, Right, 3-Blade |
17 |
Michigan 335031 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
Michigan 933419 |
Amazon |
eBay |
13-3/8 x 19, Right, 3-Blade |
19 |
Michigan 335032 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
Michigan 933421 |
Amazon |
eBay |
13-1/8 x 21, Right, 3-Blade |
21 |
Michigan 335033 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
.
Other compatible propeller options:
40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 4-1/4 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
- 40-75 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
- 40 HP E-TEC 2004-Newer
- 50 HP 2 Cyl 1971-1974
- 50 HP 3 Cy 1994 & 1998
- 50 HP E-TEC 2004-Newer
- 55 HP 3 Cyl 1968-1969
- 55 HP E-TEC 2009-Newer
- 60 HP 3 Cyl 1970-1971, 1986-2001
- 60 HP E-TEC 2004-Newer
- 60 HP 4-Stroke 1998-Newer
- 65 HP 3 Cyl 1972-1973
- 65 HP Pontoon Series 2014-Newer
- 70 HP 3 Cyl 1974-Newer
- 70 HP 4-Stroke 1998-Newer
- 75 HP 3 Cyl 1975-1984
- 75 HP 2004-Newer
- 85 HP 1969-1980, 1991-1995
- 88 HP 1981-Newer
- 90 HP 1981-Newer
- 90 HP E-TEC 2004-Newer
- 100 HP 1979-1980, 1988-Newer
- 110 HP 1986-1989
- 115 HP & 115 HP HO 1973-Newer
- 115 HP E-TEC 2004-Newer
- 120 HP 1986-1994
- 125 HP 1971-1972
- 130 HP E-TEC 2009-2010
- 135 HP 1973-1976
- 140 HP 1977-1994
- 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
- 45 HP 2 Cyl 1986-1995
- 45 HP 1986-Newer
- 50 HP 2 Cyl 1977-1979
- 55 HP 2 Cyl 1980-Newer
- 60 HP 1971-1974
- 65 HP 1972-1973
- 65 HP 3 Cyl 1984 -2001
- 70 HP 3-Cyl. 1974-2001
Michigan Vortex Aluminum Props, XHS Drop-In Hub
- B Series Propellers Using XHS 206 or XHSII 210 Drop-In Hub Kit
- 13 Tooth Spline, 4-1/4 inch Gearcase, Thru-Hub Exhaust
- Do NOT use Gearcase Adapter Ring Supplied with the propeller.
- Note: For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210 Drop-In Hub Kit. For all other engine, applications use XHS 206 Drop-In Hub Kit
- Note: When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
10 |
Michigan 992109 |
Amazon |
eBay |
14 x 10, Right, 3-Blade |
11 |
Michigan 992111 |
Amazon |
eBay |
14 x 11, Right, 3-Blade |
11 |
Michigan 941411 |
Amazon |
eBay |
13-7/8 x 11, Right, 4-Blade |
13 |
Michigan 992112 |
Amazon |
eBay |
14 x 13, Right, 3-Blade |
13 |
Michigan 941413 |
Amazon |
eBay |
13-7/8 x 13, Right, 4-Blade |
15 |
Michigan 992113 |
Amazon |
eBay |
13-3/4 x 15, Right, 3-Blade |
15 |
Michigan 941415 |
Amazon |
eBay |
13-3/8 x 15, Right, 4-Blade |
17 |
Michigan 992114 |
Amazon |
eBay |
13-1/4 x 17, Right, 3-Blade |
17 |
Michigan 941417 |
Amazon |
eBay |
13 x 17, Right, 4-Blade |
19 |
Michigan 992115 |
Amazon |
eBay |
13 x 19, Right, 3-Blade |
19 |
Michigan 941419 |
Amazon |
eBay |
12-1/2 x 19, Right, 4-Blade |
21 |
Michigan 992116 |
Amazon |
eBay |
12-3/4 x 21, Right, 3-Blade |
BRP Evinrude/Johnson OMC and Michigan Aluminum Propellers
Note: When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
9 |
BRP 177201 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
9 |
BRP 763300 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
11 |
BRP 177202 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
11 |
BRP 763301 |
Amazon |
eBay |
Cruisers, House Boats, Trolling7633000 |
11 |
OEM 382761 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
11 |
Michigan 012047 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
12 |
Michigan 012075 4-Blade |
Amazon |
eBay |
19-22 foot boats, All Loads |
13 |
BRP 177203 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
13 |
BRP 765181 |
Amazon |
eBay |
766325 Hub Kit |
13 |
OEM 391668 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
13 |
Michigan 011001 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
BRP 765182 |
Amazon |
eBay |
766325 Hub Kit |
15 |
OEM 391198 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 011002 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 061001 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
BRP 765183 |
Amazon |
eBay |
766325 Hub Kit |
17 |
OEM 391199 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 011003 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
OEM 176214 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 011024 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 061002 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
BRP 765184 |
Amazon |
eBay |
766325 Hub Kit |
19 |
OEM 390896 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 011004 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
OEM 176215 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 011025 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 061003 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
BRP 765185 |
Amazon |
eBay |
766325 Hub Kit |
21 |
OEM 389788 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 011005 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
OEM 176216 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 011026 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 061004 |
Amazon |
eBay |
14-16 foot boats, Light Loads |
Other compatible propeller options:
40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
Return to Propellers:
________________________________________________________________________________________
Sierra International 18-5678 Marine Starter Drive Assembly for Johnson/Evinrude Outboard Motor
For Sierra 18-5624, 18-5630, 18-5648, OEM 586279, 586281, 586281 Starters
________________________________________________________________________________________
18-5697 Starter Brush and Spring Set
- Sierra Brush and Spring Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5697
- Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384
________________________________________________________________________________________
Power Trim Relay 586224 582472 584416 18-5705 Johnson Evinrude OMC
________________________________________________________________________________________
________________________________________________________________________________________
18-5827 Regulator/Rectifier
- The Sierra 18-5827 Regulator/Rectifier is interchangeable with the following: CDI 193-4476, Evinrude/Johnson 585001, 584476, Mallory 9-17202. Each Sierra product meets or exceeds the original equipment part it replaces.
- Sierra Regulator/Rectifier
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5827
- Interchangeable with the following: CDI 193-4476, Evinrude/Johnson 585001, 584476, Mallory 9-17202
________________________________________________________________________________________
18-7042 Siearra Carb Kit
Note: 25, 35 HP 1995-Up Except 3 Cylinder Models
________________________________________________________________________________________
18-7093 Sierra Carburetor Needle and Seat
________________________________________________________________________________________
18-7222 Sierra Carb Kit With Float
________________________________________________________________________________________
18-7820 Fuel Pump Kit
- Sierra Fuel Pump Kit
- Contains 18-0850 Fuel Pump Gasket, 18-2900 Cap to Fuel Pump Gasket
- Sierra part number: 18-7820
- Interchangeable with the following: GLM 40820, Evinrude/Johnson 393103, Mallory 9-37702
________________________________________________________________________________________
18-4302 Marine Powerhead Gasket Set
Gasket Set Contents:
- 18-2960 Head Gasket 313413 1
- 18-2865 Adapter to Powerhead Gasket 313763 1
- 18-0951 Carb to Manifold Gasket 317305 1
- 18-2543 Water Jacket Gasket 318609 1
- 18-0989 Air Silencer Gasket 321794 1
- 18-0118 Carburetor Gasket 325092 3
- 18-0102 Exhaust Manifold Gasket 323469 1
- 18-2913 Exhaust Cover Gasket 331916 2
- 18-2938 Exhaust Cover Gasket 331917 1
- 18-2548 Thermostat Cover Gasket 332108 1
- 18-0975 Carb to Silencer Gasket 333008 1
Does not include seals.
________________________________________________________________________________________
18-4321 Powerhead Gasket Set
- Sierra Powerhead Gasket Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-4321
- Interchangeable with the following: GLM 39390, Evinrude/Johnson 438904, 398047, Mallory 9-64101
Gasket Set Contents:
- 18-0118 Carburetor Gasket 325092 3
- 18-0989 Air Silencer Gasket 321794 1
- 18-0975 Carb to Silencer Gasket 333008 1
- 18-3836 Head Gasket 329836 1
- 18-1202 Thermostat Cover Gasket 329830 1
- 18-1205 Adapter Gasket 329828 1
- 18-1207 Exhaust Manifold Gask 329833, 343863 1
- 18-1212 Intake Manifold Gasket 326926 1
- 18-1219 Grommet 320880 1
- 18-1221 Retainer 330273 1
Note 65 HP 1972-1973 use 313413 Head Gasket, plus
________________________________________________________________________________________
18-0989 Air Silencer Gasket
- Sierra Air Silencer Gasket
- Meets or exceeds the original equipment quality
- Sierra part number: 18-0989
- Interchangeable with the following: GLM 34430, Evinrude/Johnson 321794, Mallory 9-60418
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
18-3895 Low Compression Head Gasket
________________________________________________________________________________________
18-8307 Lower Main Seal
- Sierra Lower Main Seal
- Meets or exceeds the original equipment quality
- Sierra part number: 18-8307
- Interchangeable with the following: GLM 86790, Evinrude/Johnson 0331103
- OD.: 1.628"; Shaft Size: 1.110"; Width: 0.448"
________________________________________________________________________________________
- Unique anti-fouling design
- Engineered to exceed OE designs
- Maximum durability
- Designed for easy starting
________________________________________________________________________________________
________________________________________________________________________________________
Sierra International 18-5760 Marine Power Pack
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
13-1872 Upper Main Bearing
________________________________________________________________________________________
CAGED BEARING KIT
- GLM Part Number: 22800; Sierra Part Number: 18-1352; Mercury Part Number: 31-67445; OMC Part Number: 378252
- Metal Cage 16 NEEDLES
- 1.375 Journal Size 40C (1974-Thru) 45-60HP 2-Cyl. (1971-Thru) 3-Cyl. (All) V4 (1962-1978)
________________________________________________________________________________________
18-1374 Wrist Pin Bearing
- Sierra Wrist Pin Rod
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1374
- Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217
________________________________________________________________________________________
18-1378 Rod Bearing Complete
Johnson/Evinrude Rod Bearing for (18-135HP) Outboard
________________________________________________________________________________________
18-3911 Piston Rings .20 OS
- 3.020 / .020
- For 2&3 Cyl, Johnson/Evinrude 2 /3 HP
- Works with 18-4114 Piston
________________________________________________________________________________________
18-4040 Marine Needle Bearing
________________________________________________________________________________________
18-4075 Connecting Rod Bolt
- Replaces OEM part # 308186
________________________________________________________________________________________
18-4104 Piston Kit
- Sierra Piston Kit
- Bore Size: 3.030/0.030
- Sierra part number: 18-4104
- Interchangeable with the following: GLM 24080, Evinrude/Johnson 396583, 5006666, Mallory 9-53418, Wiseco 3015P3, 3115P3
________________________________________________________________________________________
Sierra 18-3910 Piston Ring Set - Standard Bore
- For Johnson/Evinrude 2 Cyl 25-35 HP mothrs with 3.000 inch bore.
________________________________________________________________________________________
Sierra 18-3912 Piston Rings - Bore 3.030/.030
For Johnson/Evinrude 2/3 Cylinder, 25-35 HP Motors
________________________________________________________________________________________
Sierra 18-4114 Piston Kit - 3.020/.020
- Sierra Piston Kit
- Meets or exceeds the original equipment quality
- Sierra part number: 18-4114
- 3 Cylinder 60-75 HP Johnson/Evinrude
- Interchangeable with the following: GLM 24060, Evinrude/Johnson 387285, 5006653, Mallory 9-53417, Wiseco 3015P2, 3115P2
________________________________________________________________________________________
18-2660 Marine Lower Unit Seal Kit
Note: 50 and 60 HP - 3 Cylinder Only
Seal Kit Contents:
________________________________________________________________________________________
18-8383 Lower Unit Seal Kit
For E-Tec 40, 50, 60 HP
________________________________________________________________________________________
174003 Johnson Evinrude OMC OEM O-Ring Packagefor TNT
1982-1988 60-235HP 3 and 4 Cylinder with Prestolite Tilt Cylinder
________________________________________________________________________________________
18-7102 O-Ring
ID: 0.430, Width: 0.065
________________________________________________________________________________________
18-7109 Marine O-Ring
ID: 0.214, Width: 0.048
________________________________________________________________________________________
18-7111 O-Ring
ID: 0.197, Width 0.113
________________________________________________________________________________________
18-7115 O-Ring
ID: 0.1735, Wisth: 0.135
________________________________________________________________________________________
18-7120 O-Ring
ID: 0.215, Width: 0.065
________________________________________________________________________________________
18-7123 O-Ring
ID: 2.235, Width: 0.100
________________________________________________________________________________________
18-7127 O-Ring
ID: 3.315, Width: 0.135
________________________________________________________________________________________
18-7128 O-Ring
ID: 1.835, Width: 0.100
________________________________________________________________________________________
18-7137 Marine O-Ring
ID: 0.320, Width: 0.155
________________________________________________________________________________________
18-7140 Marine O-Ring
ID: 2.750, Width: 0.135
________________________________________________________________________________________
18-7141 O-Ring
ID: 0.180, Width: 0.065
________________________________________________________________________________________
18-7165 O-Ring
ID: 0.500, Width: 0.065
________________________________________________________________________________________
18-7168 Marine O-Ring
ID: 0.370, Width: 0.065
________________________________________________________________________________________
18-7174 Marine O-Ring
ID: 0.620, Width: 1.100
________________________________________________________________________________________
18-0543 Oil Seal
- OD: 1.926", Shaft: 1.540", Width: 0.243"
________________________________________________________________________________________
18-2059 Marine Oil Seal for OMC
Size: 0.750, OD: 1.126, Width: 0.200
________________________________________________________________________________________
18-2060 Marine Oil Seal for OMC
Note: 50/60 HP 1981-1983 - Electric Only
Note: 50/60 HP 1986-1987 - Small Gearcase Only
Size: 1.000, OD: 1.375, Width: 0.250
________________________________________________________________________________________
________________________________________________________________________________________