Johnson 60 HP 1965 Model VX-11, VXL-11, VXH-11, VXHL-11

Clymer - Evinrude Johnson Outboard Shop Manual 1.5 to 125 Hp 1956-1972  B734

• Covers 1.5 - 125 HP 2-Stroke
• 1956-1992
• Outboard Shop Manual

SELOC - Johnson / Evinrude 1958-72 Service Repair Shop Manual 50-125 hp  #1306

• Covers all 50 - 125 Hp
• 1958-1972
• Repair Manual

SELOC - Johnson/Evinrude Outboards 1958 - 72: 1.5-125 Hp, 1-3 Cylinder & V4 Models  #1300

• Covers 1.5 - 125 HP, 1-3 Cylinder & V4
• 1958-1972
• Repair Manual

18-3005 Impeller

379769 Impeller

379776 Water Pump Kit

307217 Evinrude Johnson Prop Shear Pin, Propeller Drive Pin

• For Johnson Evinrude with Pin Drive Propellers

• 60 HP Standard  1964-1965
• 75 HP  Standard 1960-1965
• 80 HP 1966-1967
•  
• Sacrificial Part Designed to Break
• Helps prevent, or at least limit damage to your motor and prop if you hit something.
• You should have a few spares.
• Don't use the wrong, or make your shear pin from the wrong material!

Other Evinrude Johnson Prop Shear Pins, and Propeller Drive Pins

18-5807 Solenoid

18-7025 Carburetor Kit

18-7026 Carb Kit

18-7093 Sierra Carburetor Needle and Seat

18-7801 Fuel Pump Repair Kit

18-7822 Fuel Pump Kit

18-5001 Sierra Ignition Tune-Up Kit

Kit Contains:

18-5200 Condenser 580256 qty 1

18-5157 Contact Set 580290 qty 2

18-5157 Contact Set

18-5200 Condenser

Champion Spark Plug - Cj8 J8C 841

Evinrude / Johnson Gap .030

Mercury Outboards

• 15 HP 1966-1960  150    0.025
• 10 HP 1966-1960  100    0.025
• 10 HP 1966-1960  110    0.025
• 6 HP 1966-1960  60   0.025
• 3.9 HP 1966-1960  39    0.025

CAGED BEARING KIT

• GLM Part Number: 22800; Sierra Part Number: 18-1352; Mercury Part Number: 31-67445; OMC Part Number: 378252
• Metal Cage 16 NEEDLES
• 1.375 Journal Size 40C (1974-Thru) 45-60HP 2-Cyl. (1971-Thru) 3-Cyl. (All) V4 (1962-1978)

18-4040 Marine Needle Bearing

18-2689 Marine Lower Unit Seal Kit

Note: 90 HP Elect. Only

Note: (Manual/Elect.)

Seal Kit Contents:

• Part #      Desc.    O.E.#     Qty.
• 18-0173  Oil Seal 313283     1
• 18-0174  Oil Seal 326716     1
• 18-0886  Lower Gearcase Gasket 307099 1
• 18-4248  Washer 311598    2
• 18-7115  O-Ring 302588     1
• 18-7118  O-Ring 305242     1
• 18-7120  O-Ring 307853, 322598   4
• 18-7152  O-Ring 307082     1
• 18-7428  O-Ring 307103     1

18-7111 O-Ring

ID: 0.197, Width 0.113

18-7115 O-Ring

ID: 0.1735, Wisth: 0.135

18-7118 O-Ring

ID: 0.300, Width: 0.135

18-7133 Marine O-Ring

ID: 3.780, Width: 0.135

18-7152 Marine O-Ring

ID: 2.625, Width: 0.135

18-7174 Marine O-Ring

ID: 0.620, Width: 1.100

18-7180 Marine O-Ring

ID: 0.445, Width: 0.090

18-0173 Oil Seal

• O.D.: 1.320"; Shaft Size: 0.795"; Width: 0.307"

18-0174 Oil Seal

• OD: 1.382", Shaft Size: 0.750", Width: 0.242"

18-2060 Marine Oil Seal for OMC

Note: 50/60 HP 1981-1983 - Electric Only

Note: 50/60 HP 1986-1987 - Small Gearcase Only

Size: 1.000, OD: 1.375, Width: 0.250

18-6513 Starter Pawl, Pack of 3

375836 Recoil Starter Rewind Spring