Evinrude/Johnson/OMC/BRP 40 HP 2011 Model E40DPLIIS E40DRLIIS E40DSLIIA E40DTLIIA

18-3053 Sierra Impeller

Note:  40 HP Commercial 1995-2001 (RP, RW models only)

18-3394 Water Pump Repair Kit - without housing

• Sierra Water Pump Kit Without Housing
• Contains 18-2705 Oil Seal, 18-2708 Grommet, 18-2709 Wear Plate Gasket, 18-3104 Impeller, 18-3126 Wear Plate, 18-3133 Bolts, 18-3138 Impeller Key, 18-3139 Impeller Plate, 18-7481 O-Ring
• Sierra part number: 18-3394
• Interchangeable with the following: Evinrude/Johnson 0433548, 0433549, 0438592, Mallory 9-48209

18-3453 Water Pump Kit

For E-Tec 40, 50, 60 HP All

5006259 Water Pump Impeller Housing

18-1351 Carrier Needle Bearing

• Sierra Carrier Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1351
• Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407

18-1354 Needle Bearing

• Sierra Needle Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1354
• Interchangeable with the following: GLM 22890, Evinrude/Johnson 386764

18-1355 Aft Outside Carrier Needle Bearing

GLM Part Number: 22900; Sierra Part Number: 18-1355; OMC Part Number: 386765

18-1356 Pinion Gear Bearing

18-1363 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1363
• Interchangeable with the following: GLM 16350, Evinrude/Johnson 397537, OMC 979771

18-1364 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1364
• Interchangeable with the following: GLM 16360, Evinrude/Johnson 397538

18-1368 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1368
• Interchangeable with the following: GLM 16370, Evinrude/Johnson 398901

18-1369 Thrust Bearing

• Sierra Thrust Bearing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1369
• Interchangeable with the following: GLM 22940, Evinrude/Johnson 432264

40 - 140 HP Stainless Steel Propellers for Large (4-1/4" Gearcase) and Thru-Hub Exhaust

Fits the following Evinrude Johnson Outboards

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 4-1/4 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
• 40 HP E-TEC  2004-Newer
• 50 HP 2 Cyl  1971-1974
• 50 HP 3 Cy   1994 & 1998
• 50 HP E-TEC 2004-Newer
• 55 HP 3 Cyl  1968-1969
• 55 HP E-TEC 2009-Newer
• 60 HP 3 Cyl  1970-1971, 1986-2001
• 60 HP E-TEC 2004-Newer
• 60 HP 4-Stroke 1998-Newer
• 65 HP 3 Cyl  1972-1973
• 65 HP Pontoon Series  2014-Newer
• 70 HP 3 Cyl  1974-Newer
• 70 HP 4-Stroke  1998-Newer
• 75 HP 3 Cyl  1975-1984
• 75 HP  2004-Newer
• 85 HP  1969-1980, 1991-1995
• 88 HP  1981-Newer
• 90 HP  1981-Newer
• 90 HP E-TEC   2004-Newer
• 100 HP  1979-1980, 1988-Newer
• 110 HP  1986-1989
• 115 HP & 115 HP HO  1973-Newer
• 115 HP E-TEC 2004-Newer
• 120 HP  1986-1994
• 125 HP  1971-1972
• 130 HP E-TEC 2009-2010
• 135 HP  1973-1976
• 140 HP  1977-1984, 1986-1994

• 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
• 45 HP 2 Cyl  1986-1995
• 45 HP 1986-Newer
• 50 HP 2 Cyl  1977-1979
• 55 HP 2 Cyl  1980-Newer
• 60 HP 1971-1974
• 65 HP 1972-1973
• 65 HP 3 Cyl  1984 -2001
• 70 HP 3-Cyl. 1974-2001

BRP Evinrude Viper Stainless Steel for Runabouts and General Recreation

If you want speed, you want the Viper prop.  It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed.  Excellent on any recreational boat, from runabouts and cruisers to deck boats.

• V6 - Standard Rotation
• V4 - Standard Rotation
• Versatile 3-Blade performance
• Excellent balance of speed and durability
• Recommended for runabout, deck/flats, multi-species, offshore and pontoon boats.
• Pressed In Rubber Hub

BRP Evinrude Rogue Stainless Steel for Small Runabouts and Flats Boats

• Provides extra stern lift
• Stays on plane with minimum RPM
• Custom high luster finish
• 4 Blade, Right Rotation
• Pressed In Rubber Hub

BRP Evinrude Raker H.O. for Bass Boats and High Performance

• Set the highest standards in top speed performance
• Maximizes the superior power and torque of Evinrude E-TEC G2 engine
• Superior bow lift
• Vented hub for faster acceleration
• Recommended for multi-species (fiberglass only) bass and sport runabout
• Pressed In Rubber Hub

OMC and Michigan Stainless Steel

• Pressed-In Rubber Hub
• 13 Tooth Spline, 4-1/4 inch gearcase

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Rapture Performance Stainless Steel

• Pressed-In Rubber Hub
• 13 Tooth Spline, 4-1/4 inch gearcase

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Apollo Stainless Steel,  XHS Drop-In Hub

• Michigan "B" Series Propellers Using Michigan XHS 206 or Michigan XHSII 210  Drop-In Hub Kit
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use Michigan XHSII 210  Drop-In Hub Kit.  For all other engines, applications use Michigan XHS 206  Drop-In Hub Kit.

Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210  Drop-In Hub Kit.  For all other engine, applications use XHS 206  Drop-In Hub Kit

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Ballistic High-Performance Stainless Steel

• Michigan "B" Series Propellers Using Michigan XHS 206 or Michigan XHSII 210  Drop-In Hub Kit
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use Michigan XHSII 210  Drop-In Hub Kit.  For all other engines, applications use Michigan XHS 206  Drop-In Hub Kit.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

.

Other compatible propeller options:

40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

Return to Propellers:

40 - 50 HP Evinrude Johnson BRP (4-Stroke) Aluminum, 13 Spline, 3-1/4 Gearcase

Aluminum Props

• Rubber Hub
• 13 Tooth Spline, 3-1/4 inch Gearcase, Thru-Hub Exhaust

For Evinrude Johnson OMC BRP

• Evinrude Johnson BRP 40 and 50 HP (4-Stroke) 1999 - Newer

Sorted by Pitch. 

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Vortex Aluminum Props,  XHS Drop-In Hub

• D Series Propellers Using XHS 115 or XHSII 215 Drop-In Hub Kit
• 13 Tooth Spline, 3-1/4 inch Gearcase, Thru-Hub Exhaust

For Evinrude Johnson OMC BRP

• Evinrude Johnson BRP 40 and 50 HP (4-Stroke) 1999-2005

Sorted by Pitch. 

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

40 - 50 HP Evinrude Johnson BRP (4-Stroke) Stainless Steel Propellers, 13 Spline, 3-1/4 Gearcase

40 - 50 HP Evinrude Johnson BRP (4-Stroke) Aluminum, 13 Spline, 3-1/4 Gearcase

Return to Propellers:

40 - 140 HP Aluminum Propellers for Large (4-1/4") Gearcase and Thru-Hub Exhaust

Fits the following Evinrude Johnson Outboards

• 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 4-1/4 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.

• 40-75 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
• 40 HP E-TEC  2004-Newer
• 50 HP 2 Cyl  1971-1974
• 50 HP 3 Cy   1994 & 1998
• 50 HP E-TEC 2004-Newer
• 55 HP 3 Cyl  1968-1969
• 55 HP E-TEC 2009-Newer
• 60 HP 3 Cyl  1970-1971, 1986-2001
• 60 HP E-TEC 2004-Newer
• 60 HP 4-Stroke 1998-Newer
• 65 HP 3 Cyl  1972-1973
• 65 HP Pontoon Series  2014-Newer
• 70 HP 3 Cyl  1974-Newer
• 70 HP 4-Stroke  1998-Newer
• 75 HP 3 Cyl  1975-1984
• 75 HP  2004-Newer
• 85 HP  1969-1980, 1991-1995
• 88 HP  1981-Newer
• 90 HP  1981-Newer
• 90 HP E-TEC   2004-Newer
• 100 HP  1979-1980, 1988-Newer
• 110 HP  1986-1989
• 115 HP & 115 HP HO  1973-Newer
• 115 HP E-TEC 2004-Newer
• 120 HP  1986-1994
• 125 HP  1971-1972
• 130 HP E-TEC 2009-2010
• 135 HP  1973-1976
• 140 HP  1977-1994

• 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
• 45 HP 2 Cyl  1986-1995
• 45 HP 1986-Newer
• 50 HP 2 Cyl  1977-1979
• 55 HP 2 Cyl  1980-Newer
• 60 HP 1971-1974
• 65 HP 1972-1973
• 65 HP 3 Cyl  1984 -2001
• 70 HP 3-Cyl. 1974-2001

Michigan Vortex Aluminum Props,  XHS Drop-In Hub

• B Series Propellers Using XHS 206 or XHSII 210  Drop-In Hub Kit
• 13 Tooth Spline, 4-1/4 inch Gearcase, Thru-Hub Exhaust
• Do NOT use Gearcase Adapter Ring Supplied with the propeller.
• Note:  For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210  Drop-In Hub Kit.  For all other engine, applications use XHS 206  Drop-In Hub Kit
• Note:  When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

BRP Evinrude/Johnson OMC and Michigan Aluminum Propellers

Note:  When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.

Pitch is how far, in inches,  the boat would travel with one prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Other compatible propeller options:

40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust

Return to Propellers:

Michigan Aluminum Props for 40-50 HP Evinrude Johnson BRP (4-Stroke)

• Evinrude Johnson BRP 40 and 50 HP (4-Stroke) 1999 & Newer
• 13 Spline

Sorted by Pitch. 

Pitch is how far, in inches,  the boat would travel with 1 prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

Michigan Aluminum Props

40 - 75 HP Stainless Steel Propellers for Small 3-3/8" Small Gearcase (Thru-Hub Exhaust), 13 Tooth Spline

For Evinrude Johnson OMC BRP, 13 Tooth Spline

• 40-75 HP (Small Gearcase & Thru-Hub Exhaust)
• 13 Tooth Spline, 3-3/8 inch gearcase
• Be sure to count the number of spline teeth on your prop shaft.
•  
• 40 HP, 2 Cyl, 1984 - 2005
• 48 HP, 1987-1996
• 50 HP, 2 Cyl, 1975 - 2005
• 55 HP, 2 Cyl, 1976-1979
• 60 HP 2 Cyl, 1980-1985
• 65 HP, 2 Cyl, 1980-1985
• 75 HP, 3 Cyl, 1975-1985
• Sprint/Formula E  1986-1992

Sorted by Pitch. 

Pitch is how far, in inches,  the boat would travel with 1 prop rotation (under ideal conditions).  Higher pitch = Faster, Lower Pitch = Slower and more power.

OMC and Michigan Stainless Steel

Michigan Ballistic High-Performance Stainless Steel,  XHS Drop-In Hub

• C Series Propellers Using XHS 111 or XHSII 221 Drop-In Hub Kit
• 13 Tooth Spline, 3-3/8 inch Gearcase, Thru-Hub Exhaust

Michigan Rapture Performance Stainless Steel

Rubber Hub

40 - 75 HP Evinrude Johnson BRP Aluminum Propellers for Small 3-3/8" Small Gearcase (Thru-Hub Exhaust)

40 - 75 HP Evinrude Johnson BRP Stainless Steel Propellers for Small 3-3/8" Small Gearcase (Thru-Hub Exhaust)

Return to Propellers:

18-6815 Trim Motor

• Sierra Evinrude/Johnson Trim Motor
• Meets or exceeds the original equipment quality
• Sierra part number: 18-6815
• Fits 40-50 HP (2004-2009), 60 HP (2006-2009), and 25-30 HP (2009) engines

18-7800 Fuel Pump Kit 

• The Sierra 18-7800 Fuel Pump Kit is interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701. Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket.
• Sierra Fuel Pump Kit
• Meets or exceeds the original equipment quality
• Sierra part number: 18-7800
• Interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701
• Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket

5005907 Powerhead Gasket Set

586980 Ignition Coil

5006736 Piston Kit - .030 Oversize

5007545 Piston Kit - Standard Bore

18-2694 Lower Unit Seal Kit

Seal Kit Contents:

• Part #      Desc.  O.E.# Qty.
• 18-2709  Wear Plate Gasket   336530    1
• 18-7115  O-Ring 302588  1
• 18-7127  O-Ring 313446  1
• 18-7120  O-Ring 307853, 322598  1
• 18-7172  O-Ring 553126  1
• 18-7137  O-Ring 318372  1
• 18-7475  O-Ring 332584  1
• 18-7481  Seal 315788      1
• 18-2708  Seal 333758      1
• 18-2059  OIl Seal 321466 2
• 18-2018  OIl Seal 305987 2
• 18-2064  OIl Seal 332205 1
• 18-2705  Seal 315748      1
• 18-4248  Washer 311598 1
• 18-7173  O-Ring 310327, 910582    1

18-8383 Lower Unit Seal Kit

For E-Tec 40, 50, 60 HP

325431 Recoil Starter Rewind Spring