Evinrude/Johnson/OMC/BRP 25 HP 1992 Commercial Model 25RPU 25RPLU 25RSLU 25RWEN 25RWLEN

Clymer - Evinrude/Johnson 2-300 HP Outboards (Includes Jet Drives and Sea Drives) 1991-1994   B733

• Covers 2 - 300 HP
• 1991-1994
• Shop Manual

SELOC - Johnson Evinrude 1 & 2-Cylinder Outboards 1990-95 Repair Manual #1304

• Covers all 1 - 50 Hp, 1 and 2-cylinder, 2-stroke Models.
• 1990-1995
• Repair Manual

SELOC - Johnson/Evinrude Outboards, All In-Line Engines, 2-4 Stroke, 1990-01  #1312

• Covers all inline engines 2-70 Hp, 2 and 4-Stroke Models. Includes Fuel Injection and Jet Drives.
• 1990-2001
• Repair Manual

18-3051 Impeller

18-3359  Impeller Wear Plate

18-3363 Water Pump Housing

18-3367 Water Pump Housing

 18-3381 Water Pump Repair Kit Without Housing

• The Sierra 18-3381 Water Pump Kit without Housing is interchangeable with the following: GLM 12071, Evinrude/Johnson 0393509, 0393630, Mallory 9-48205.
• Sierra Water Pump Kit without Housing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3381
• Interchangeable with the following: GLM 12071, Evinrude/Johnson 0393509, 0393630, Mallory 9-48205

18-3382 Water Pump Repair Kit With Housing

18-3383 Water Pump Repair Kit With Housing

18-3401 Water Pump Repair Kit Without Housing

18-3543 Marine Thermostat

• 143 deg farenheigt

18-3674 Thermostat Kit

• The Sierra 18-3674 Thermostat Kit is interchangeable with the following: GLM 13280. Contains: 18-1219 Grommet Gasket, 18-0182 Thermostat Gasket, 18-3135 Stainless Steel Bolt, 18-2546 Thermostat Gasket, 18-3567 Rubber Valve, 18-3562 Valve Cup, 18-1243 Valve Spring, 18-3563 Poppet Relief Valve, 18-3565 Retainer, 18-3543 Thermostat.
• Sierra Thermostat Kit
• 18-3543 Thermostat Included
• Sierra part number: 18-3674
• Interchangeable with the following: GLM 13280

15 H.O. - 35 HP Aluminum and Stainless Steel Propellers for Johnson Evinrude (Thru Hub Exhaust), 3" Gearcase, 14 Tooth Spline

• For Evinrude Johnson OMC BRP
• 15 HP E-Tech H.O.  High Thurst, 2011 - Newer
• 20 HP 2 Cylinder 1984 - 1997
• 25 HP Commercial 1992 - Newer
• 25 HP 2 & 3 Cylinder  1984 - Newer
• 25 HP E-TEC  2990 - Newer
• 30 HP 2 Cylinder 1984 - Newer
• 30 HP E-TEC  2990 - Newer
• 35 HP 2 Cylinder  1979 - 1983
• 35 HP 3 Cylinder  1997-2001

15 H.O. - 35 HP Aluminum  14 Tooth Spline Drive

• Ruber Hub
• 14 Tooth Spline
• 3 Inch Gearcase

Evinrude Johnson BRP Stainless Steel Spline Drive

• Rubber Hub
• 14 Tooth Spline
• 3 Inch Gearcase
• Great props but hard to find.

Michigan Vortex Aluminum Spline Drive

• You MUST use 991224 Gearcase Adapter Ring supplied with the propeller.
• E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
• 14 Tooth Spline, 3-inch Gearcase

Ballistic High-Performance Stainless Steel Spline Drive

• E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
• 14 Tooth Spline, 3-inch Gearcase

18-1287 Forward Gear & Bushing

18-5697 Starter Brush and Spring Set

• Sierra Brush and Spring Set
• Meets or exceeds the original equipment quality
• Sierra part number: 18-5697
• Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384

Sierra International 18-5709 Marine Rectifier for Johnson/Evinrude Outboard Motor

173692 Regulator Rectifier 4 Wires for Johnson Evinrude 9.9-60 HP

18-5808 STARTER SOLENOID

18-5827 Regulator/Rectifier

• The Sierra 18-5827 Regulator/Rectifier is interchangeable with the following: CDI 193-4476, Evinrude/Johnson 585001, 584476, Mallory 9-17202. Each Sierra product meets or exceeds the original equipment part it replaces.
• Sierra Regulator/Rectifier
• Meets or exceeds the original equipment quality
• Sierra part number: 18-5827
• Interchangeable with the following: CDI 193-4476, Evinrude/Johnson 585001, 584476, Mallory 9-17202

18-6528 Throttle Cable (23 1/2")

• Sierra Throttle Cable
• Meets or exceeds the original equipment quality
• Sierra part number: 18-6528
• Interchangeable with the following: Evinrude/Johnson 5000581, 396161

18-7093 Sierra Carburetor Needle and Seat

18-7222 Sierra Carb Kit With Float

18-7353 Fuel Pump

• Sierra Fuel Pump
• Uses Kit 18-7800
• Meets or exceeds the original equipment quality
• Sierra part number: 18-7353
• Interchangeable with the following: Evinrude/Johnson 438555, 433386, Mallory 9-35353

18-7800 Fuel Pump Kit 

• The Sierra 18-7800 Fuel Pump Kit is interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701. Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket.
• Sierra Fuel Pump Kit
• Meets or exceeds the original equipment quality
• Sierra part number: 18-7800
• Interchangeable with the following: GLM 40850, Evinrude/Johnson 438616, 433519, Mallory 9-37701
• Contains: (2) 18-7796 Check Valve, (1) 18-7413 O-Ring, (1) 18-7403 O-Ring, (1) 18-0850 Fuel Pump Gasket

18-3803 Head Gasket

18-4307 Powerhead Gasket Set

Gasket Set Contents:

• 18-0850 Fuel Pump Mounting Gasket 303615      1
• 18-0971 By-Pass Gasket                  319661        1
• 18-0981 Leaf Plate Gasket                321479       1
• 18-0106 Exhaust Manifold Gasket      324323      2
• 18-0118 Carburetor Gasket              325092        1
• 18-2862 Manifold to Leaf Plate Gasket 321573, 326260  1
• 18-0126 Inner Exhaust Cover Gasket   326264       1
• 18-2852 Powerhead to Lower Unit Gasket 330621   1
• 18-3803 Head Gasket           329419, 765012         1

18-5179 Ignition Plug In Coil

18-5794 Power PackCDI Electronics

UFI

This is for Quite rider series with longer wires due to power pack mounting location.

763798 Power Pack

Champion 876M Spark Plug QL16V

• Plug Gap 0.30

18-1374 Wrist Pin Bearing

• Sierra Wrist Pin Rod
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1374
• Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217

18-1378 Rod Bearing Complete

Johnson/Evinrude Rod Bearing for (18-135HP) Outboard

18-1391 Upper/Lower Crank Bearing

18-1393 Upper Crankshaft Bearing

18-3911 Piston Rings  .20 OS

• 3.020 / .020
• For 2&3 Cyl, Johnson/Evinrude 2 /3 HP
• Works with 18-4114 Piston

18-3914 .02 OS Marine Piston Rings

3.207/.020 Bore

18-4075 Connecting Rod Bolt

• Replaces OEM part # 308186

18-4107 PISTON KIT - Standard Bore

• 2 Cylinder, 18-35Hp Outboards

• Johnson/Evinrude

• 3.000 / std.

18-4127 Piston Kit  -  .030 Oversize

• .030 oversize
• All piston kits include rings, pin and retainers.
• 3.0 / .030 Bore

18-8355 Crankshaft Seal Kit

For:

• 20-30AC, TE, E/20-35R/25Comm. (1990)
• 20-35R/25/30TE/20-30E (1993-96)
• 25/28/30R, TE, RE (1991-92)
• 20-30AC,E/25Comm./28 (1994-96)
• Applies for Johnson/Evinrude engines

Sierra 18-3910 Piston Ring Set - Standard Bore

• For Johnson/Evinrude 2 Cyl 25-35 HP mothrs with 3.000 inch bore.

Sierra 18-3912 Piston Rings - Bore 3.030/.030

For Johnson/Evinrude 2/3 Cylinder, 25-35 HP Motors

Sierra 18-3913 Piston Ring

• For Evinrude/Johnson 2/3 Cylinder, 35-60 HP Motors
• Sierra Piston Rings
• Bore Size: 3.187/Std
• Sierra part number: 18-3913
• Interchangeable with the following: GLM 24310, Evinrude/Johnson 391170, 434107, Mallory 9-54400, Wiseco 3187KD

Sierra 18-3915 Piston Rings 3.217/.030

• Sierra Piston Rings
• For Johnson/Evinrude 3/2 Cylinder, 35-60 HP Motors
• Bore 3.217/.030
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3915
• Interchangeable with the following: GLM 24330, Evinrude/Johnson 391416, 434109, Mallory 9-54402, Wiseco 3217KD

Sierra 18-4117 Piston Kit - 3.020/.020

• Sierra Piston Kit
• Meets or exceeds the original equipment quality
• Sierra part number: 18-4117
• Interchangeable with the following: Mallory 9-53413

18-2657 Lower Unit Seal Kit

Seal Kit Contents:

• Part #      Desc.                 O.E. #     Qty.
• 18-0882 Shift Rod Gasket 304764        1
• 18-0108 Lower Gearcase Gasket 324449 1
• 18-3360 Impeller Housing Gasket 329390 1
• 18-7411 O-Ring   321921                                1
• 18-2027 Oil Seal 321459                       2
• 18-2031 Oil Seal 321787                       1
• 18-2063 Oil Seal 330327                       1
• 18-4248 Washer 311598                       2
• 18-7100 O-Ring 301877                         1
• 18-7145 O-Ring 333572                         2
• 18-7475 Quad Ring 332583                   1

18-7100 O-Ring

ID: 0.245, Width: 0.155

18-7475 O-Ring

ID: 0.250, Width: 0.065

433567 Trim Tilt Seal Rebuild Kit, Kit

1989-2005  25HP 35HP 40HP 48HP 50HP with TNT Units

18-4904 Starter Handle and Rope for Johnson/Evinrude

• Sierra Starter Handle and Rope Kit
• Rope size: #4.5
• Sierra part number: 18-4904

Sierra 18-5627 Outboard Starter

• Sierra Outboard Starter
• Fits 20-35 HP models 1987-1993
• Sierra part number: 18-5627
• Interchangeable with the following: Arco 5390, Evinrude/Johnson 583473, 585459, 585059, 778991, Mallory 9-15043

18-6501 Rewind Spring for Johnson/Evinrude

• Sierra Rewind Spring
• Meets or exceeds the original equipment quality
• Sierra part number: 18-6501
• Interchangeable with the following: Evinrude/Johnson 395460, 307573
• Fit specific, check part numbers to ensure proper fit