- Covers 2 - 300 HP
- 1991-1994
- Shop Manual
________________________________________________________________________________________
- Covers 80 - 300 HP 2-Stroke
- 1992-1996 Repair Manual
________________________________________________________________________________________
- Covers all 65-300 Hp, V4, V6 and V8 engines
- 1992-2001
- Repair Manual
________________________________________________________________________________________
________________________________________________________________________________________
18-3211 Marine Impeller Repair Kit
________________________________________________________________________________________
18-3346 Cup and Plate Assembly
________________________________________________________________________________________
18-3390 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
18-3391 Water Pump Housing Kit - With Housing
- Sierra Water Pump Kit with Housing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3391
- Interchangeable with the following: GLM 12103, Evinrude/Johnson 395072
- Contains: 18-2557 Impeller Gasket, 18-2704 Grommet, 18-2769 Rubber Seal, (4) 18-3136 Bolt, 18-3153 Bolt, 18-3299 Impeller Key, 18-3346 Cup and Plate Assembly
________________________________________________________________________________________
18-3392 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
435990 Water Pump Impeller Housing
Note: 90/115 HP 1995-2006 Looper (except SL Model)
________________________________________________________________________________________
18-1117 Pinion Bearing
- Sierra Pinion Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1117
- Interchangeable with the following: Chrysler 31-F694057, 31-42647A1, GLM 21610, Evinrude/Johnson 387817, 5007751, Mallory 9-75121, Mercruiser/Mercury 31-42647A1, 31-42647
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
18-1350 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1350
- Interchangeable with the following: GLM 22860, Evinrude/Johnson 379504, OMC 379504
________________________________________________________________________________________
18-1351 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1351
- Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407
________________________________________________________________________________________
18-1357 Pinion Needle Bearing
- Sierra Pinion Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1357
- Interchangeable with the following: GLM 22880, Evinrude/Johnson/OMC 384195
________________________________________________________________________________________
18-1365 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1365
- Interchangeable with the following: GLM 16330, Evinrude/Johnson 387656, 383248, OMC 387656
- Thrust Driveshaft Johnson/Evinrude 90-250hp OMC Stringer/Cobra All Models
________________________________________________________________________________________
18-1366 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1366
- Interchangeable with the following: GLM 16300, Evinrude/Johnson 382408
________________________________________________________________________________________
18-1371 Thrust Forward Bearing
- Sierra Thrust Forward Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1371
- Interchangeable with the following: GLM 16310, Evinrude/Johnson 385043, OMC 385043, 3852221
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
18-2221 Gear Set
- Sierra Gear Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2221
- Interchangeable with the following: GLM 22630, Mallory 9-73560
- Fit specific, check part numbers to ensure proper fit
Gear Set Contents:
________________________________________________________________________________________
18-2229 Driveshaft Shim
.003", 1.24 ID
________________________________________________________________________________________
18-2230 Driveshaft Shim
.004", 1.24" ID
________________________________________________________________________________________
18-2231 Driveshaft Shim
.005", 1.24" ID
________________________________________________________________________________________
18-2252 Prop Shaft
- Sierra Prop Shaft
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2252
- Interchangeable with the following: GLM 22416, Evinrude/Johnson 436888, 387818, OMC 387818
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
- Sierra Lower Drive Shaft
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2277
- Interchangeable with the following: GLM 22409, Evinrude/Johnson 335722
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
18-2326 Upper Drive Shaft Assembly
- Long
- Sierra Upper Drive Shaft Assembly
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2326
- Interchangeable with the following: GLM 22433, Evinrude/Johnson 436232
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
________________________________________________________________________________________
18-3708 Prop Nut & Keeper
________________________________________________________________________________________
18-3716 Marine Prop Nut Kit
Prop Kit Contents:
- Part # O.E.# Description
- 18-3705 314503 Prop Nut
- 18-3742 314502 Cotter Pin
- 18-4228 315810 Prop Spacer
________________________________________________________________________________________
18-3742 Marine Cotter Pin
- Sierra Cotter Pin
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3742-9
- Interchangeable with the following: GLM 22120, Evinrude/Johnson 314502, OMC 314502
- Size: 1/8 x 1-1/4"
________________________________________________________________________________________
________________________________________________________________________________________
18-4231 Marine Prop Spacer
________________________________________________________________________________________
18-4232 Marine Prop Spacer
________________________________________________________________________________________
18-9219 Lower Drive Shaft
- Sierra Lower Drive Shaft
- Meets or exceeds the original equipment quality
- Sierra part number: 18-9219
- Interchangeable with the following: GLM 22407, Evinrude/Johnson 335677
- Lower Drive Shaft for Some Johnson Evinrude 90 to 225 HP Replaces 345905 335677
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards (15 Spline)
- 90 HP V-4 1995-Newer
- 100 HP V-4 Commercial 1884-Newer
- 115 HP V-4 1995-Newer
- 130 HP V-4 1995 Newer
- 120 - 140 HP V-4 1985
- 140 HP V4 1989-1994
- 150 HP V-6 1978-Newer
- 150 HP V-6 Commercial 1993-Newer
- 155 HP V-6 Commercial 1978-Newer
- 175 HP V-6 1977-Newer
- 185 HP V-6 1984-1985
- 200 HP V-6 1976-Newer
- 225 HP V-6 1986-Newer
- 235 HP V-6 1978-1985
- 250 HP V-6 2001-Newer
- 2.6 Liter V6 1984-1985
- 250 HP V-8 1991-Newer
- 275 HP V-8 1986-1988
- 300 HP V-8 1986-1995
- 3.6 Liter V-8 1986-1987
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
10 |
Michigan 011015 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
13 |
OMC 391536 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
OMC 391535 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
Michigan 011006 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
17 |
OMC 391200 |
Amazon |
eBay |
20-26 foot boats, All Loads Ski. |
17 |
Michigan 011007 |
Amazon |
eBay |
20-26 foot boats, All Loads Ski. |
19 |
OMC 391201 |
Amazon |
eBay |
18-22 foot boats, All Loads Ski. |
19 |
Michigan 011008 |
Amazon |
eBay |
18-22 foot boats, All Loads Ski. |
21 |
OMC 391202 |
Amazon |
eBay |
17-19 foot boats, All Loads Ski. |
21 |
Michigan 011009 |
Amazon |
eBay |
17-19 foot boats, All Loads Ski. |
23 |
OMC 391203 |
Amazon |
eBay |
15-18 foot boats, All Loads Ski. |
23 |
Michigan 011010 |
Amazon |
eBay |
15-18 foot boats, All Loads Ski. |
Other compatible propeller options:
90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 4-1/4 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
- 40 HP E-TEC 2004-Newer
- 50 HP 2 Cyl 1971-1974
- 50 HP 3 Cy 1994 & 1998
- 50 HP E-TEC 2004-Newer
- 55 HP 3 Cyl 1968-1969
- 55 HP E-TEC 2009-Newer
- 60 HP 3 Cyl 1970-1971, 1986-2001
- 60 HP E-TEC 2004-Newer
- 60 HP 4-Stroke 1998-Newer
- 65 HP 3 Cyl 1972-1973
- 65 HP Pontoon Series 2014-Newer
- 70 HP 3 Cyl 1974-Newer
- 70 HP 4-Stroke 1998-Newer
- 75 HP 3 Cyl 1975-1984
- 75 HP 2004-Newer
- 85 HP 1969-1980, 1991-1995
- 88 HP 1981-Newer
- 90 HP 1981-Newer
- 90 HP E-TEC 2004-Newer
- 100 HP 1979-1980, 1988-Newer
- 110 HP 1986-1989
- 115 HP & 115 HP HO 1973-Newer
- 115 HP E-TEC 2004-Newer
- 120 HP 1986-1994
- 125 HP 1971-1972
- 130 HP E-TEC 2009-2010
- 135 HP 1973-1976
- 140 HP 1977-1984, 1986-1994
- 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
- 45 HP 2 Cyl 1986-1995
- 45 HP 1986-Newer
- 50 HP 2 Cyl 1977-1979
- 55 HP 2 Cyl 1980-Newer
- 60 HP 1971-1974
- 65 HP 1972-1973
- 65 HP 3 Cyl 1984 -2001
- 70 HP 3-Cyl. 1974-2001
BRP Evinrude Viper Stainless Steel for Runabouts and General Recreation
If you want speed, you want the Viper prop. It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed. Excellent on any recreational boat, from runabouts and cruisers to deck boats.
- V6 - Standard Rotation
- V4 - Standard Rotation
- Versatile 3-Blade performance
- Excellent balance of speed and durability
- Recommended for runabout, deck/flats, multi-species, offshore and pontoon boats.
- Pressed In Rubber Hub
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
15 |
BRP 763929 |
Amazon |
eBay |
13 7/8 x 15, RH, 3-Blade, SS |
17 |
BRP 763930 |
Amazon |
eBay |
13 7/8 x 17, RH, 3-Blade, SS |
19 |
BRP 763931 |
Amazon |
eBay |
13 7/8 x 19, RH, 3-Blade, SS |
21 |
BRP 763932 |
Amazon |
eBay |
13 7/8 x 21, RH, 3-Blade, SS |
BRP Evinrude Rogue Stainless Steel for Small Runabouts and Flats Boats
- Provides extra stern lift
- Stays on plane with minimum RPM
- Custom high luster finish
- 4 Blade, Right Rotation
- Pressed In Rubber Hub
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
13 |
BRP 763964 |
Amazon |
eBay |
13 1/2 x 13, RH, 3-Blade, SS |
15 |
BRP 763965 |
Amazon |
eBay |
13 1/4 x 15, RH, 3-Blade, SS |
17 |
BRP 763966 |
Amazon |
eBay |
13 x 17, RH, 3-Blade, SS |
19 |
BRP 763967 |
Amazon |
eBay |
13 x 19, RH, 3-Blade, SS |
21 |
BRP 763968 |
Amazon |
eBay |
13 x 21, RH, 3-Blade, SS |
BRP Evinrude Raker H.O. for Bass Boats and High Performance
- Set the highest standards in top speed performance
- Maximizes the superior power and torque of Evinrude E-TEC G2 engine
- Superior bow lift
- Vented hub for faster acceleration
- Recommended for multi-species (fiberglass only) bass and sport runabout
- Pressed In Rubber Hub
OMC and Michigan Stainless Steel
- Pressed-In Rubber Hub
- 13 Tooth Spline, 4-1/4 inch gearcase
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
13 |
BRP 763957 |
Amazon |
eBay |
13-3/4 x 13 Right 3-Blade
|
15 |
BRP 763950 |
Amazon |
eBay |
13-3/8 x 15, Right, 3-Blade |
15 |
OMC 389949 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 013028 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
BRP 763951 |
Amazon |
eBay |
13-1/4 x 17, Right, 3-Blade |
17 |
OMC 389948 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 013030 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
BRP 763952 |
Amazon |
eBay |
13-1/8 x 19, Right, 3-Blade |
19 |
OMC 389510 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 013033 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
OMC 389512 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 013034 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
Michigan Rapture Performance Stainless Steel
- Pressed-In Rubber Hub
- 13 Tooth Spline, 4-1/4 inch gearcase
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 013076 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
16 |
Michigan 063042 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
Michigan 013077 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 063043 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
Michigan 013078 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 063044 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
Michigan 013079 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 063045 |
Amazon |
eBay |
14-16 foot boats, Light Loads |
Michigan Apollo Stainless Steel, XHS Drop-In Hub
Note: For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210 Drop-In Hub Kit. For all other engine, applications use XHS 206 Drop-In Hub Kit
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 993143 |
Amazon |
eBay |
13-3/8 x 15, Right, 3 Blade |
15 Left |
Michigan 993153 |
Amazon |
eBay |
13-3/8 x 15, Left, 3 Blade |
17 |
Michigan 993144 |
Amazon |
eBay |
13-1/4 x 17, Right, 3 Blade |
17 Left |
Michigan 993154 |
Amazon |
eBay |
13-1/4 x 17, Left, 3 Blade |
19 |
Michigan 993145 |
Amazon |
eBay |
13-1/8 x 19, Right, 3 Blade |
19 Left |
Michigan 993155 |
Amazon |
eBay |
13-1/8 x 19, Left, 3 Blade |
21 |
Michigan 993146 |
Amazon |
eBay |
13 x 21, Right, 3 Blade |
21 Left |
Michigan 993156 |
Amazon |
eBay |
13 x 21, Right, 3 Blade |
Michigan Ballistic High-Performance Stainless Steel
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 933415 |
Amazon |
eBay |
13-5/8 x 15, Right, 3-Blade |
15 |
Michigan 335030 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
Michigan 933417 |
Amazon |
eBay |
13-1/2 x 17, Right, 3-Blade |
17 |
Michigan 335031 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
Michigan 933419 |
Amazon |
eBay |
13-3/8 x 19, Right, 3-Blade |
19 |
Michigan 335032 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
Michigan 933421 |
Amazon |
eBay |
13-1/8 x 21, Right, 3-Blade |
21 |
Michigan 335033 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
.
Other compatible propeller options:
40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 4-1/4 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
- 40-75 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
- 40 HP E-TEC 2004-Newer
- 50 HP 2 Cyl 1971-1974
- 50 HP 3 Cy 1994 & 1998
- 50 HP E-TEC 2004-Newer
- 55 HP 3 Cyl 1968-1969
- 55 HP E-TEC 2009-Newer
- 60 HP 3 Cyl 1970-1971, 1986-2001
- 60 HP E-TEC 2004-Newer
- 60 HP 4-Stroke 1998-Newer
- 65 HP 3 Cyl 1972-1973
- 65 HP Pontoon Series 2014-Newer
- 70 HP 3 Cyl 1974-Newer
- 70 HP 4-Stroke 1998-Newer
- 75 HP 3 Cyl 1975-1984
- 75 HP 2004-Newer
- 85 HP 1969-1980, 1991-1995
- 88 HP 1981-Newer
- 90 HP 1981-Newer
- 90 HP E-TEC 2004-Newer
- 100 HP 1979-1980, 1988-Newer
- 110 HP 1986-1989
- 115 HP & 115 HP HO 1973-Newer
- 115 HP E-TEC 2004-Newer
- 120 HP 1986-1994
- 125 HP 1971-1972
- 130 HP E-TEC 2009-2010
- 135 HP 1973-1976
- 140 HP 1977-1994
- 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
- 45 HP 2 Cyl 1986-1995
- 45 HP 1986-Newer
- 50 HP 2 Cyl 1977-1979
- 55 HP 2 Cyl 1980-Newer
- 60 HP 1971-1974
- 65 HP 1972-1973
- 65 HP 3 Cyl 1984 -2001
- 70 HP 3-Cyl. 1974-2001
Michigan Vortex Aluminum Props, XHS Drop-In Hub
- B Series Propellers Using XHS 206 or XHSII 210 Drop-In Hub Kit
- 13 Tooth Spline, 4-1/4 inch Gearcase, Thru-Hub Exhaust
- Do NOT use Gearcase Adapter Ring Supplied with the propeller.
- Note: For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210 Drop-In Hub Kit. For all other engine, applications use XHS 206 Drop-In Hub Kit
- Note: When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
10 |
Michigan 992109 |
Amazon |
eBay |
14 x 10, Right, 3-Blade |
11 |
Michigan 992111 |
Amazon |
eBay |
14 x 11, Right, 3-Blade |
11 |
Michigan 941411 |
Amazon |
eBay |
13-7/8 x 11, Right, 4-Blade |
13 |
Michigan 992112 |
Amazon |
eBay |
14 x 13, Right, 3-Blade |
13 |
Michigan 941413 |
Amazon |
eBay |
13-7/8 x 13, Right, 4-Blade |
15 |
Michigan 992113 |
Amazon |
eBay |
13-3/4 x 15, Right, 3-Blade |
15 |
Michigan 941415 |
Amazon |
eBay |
13-3/8 x 15, Right, 4-Blade |
17 |
Michigan 992114 |
Amazon |
eBay |
13-1/4 x 17, Right, 3-Blade |
17 |
Michigan 941417 |
Amazon |
eBay |
13 x 17, Right, 4-Blade |
19 |
Michigan 992115 |
Amazon |
eBay |
13 x 19, Right, 3-Blade |
19 |
Michigan 941419 |
Amazon |
eBay |
12-1/2 x 19, Right, 4-Blade |
21 |
Michigan 992116 |
Amazon |
eBay |
12-3/4 x 21, Right, 3-Blade |
BRP Evinrude/Johnson OMC and Michigan Aluminum Propellers
Note: When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
9 |
BRP 177201 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
9 |
BRP 763300 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
11 |
BRP 177202 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
11 |
BRP 763301 |
Amazon |
eBay |
Cruisers, House Boats, Trolling7633000 |
11 |
OEM 382761 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
11 |
Michigan 012047 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
12 |
Michigan 012075 4-Blade |
Amazon |
eBay |
19-22 foot boats, All Loads |
13 |
BRP 177203 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
13 |
BRP 765181 |
Amazon |
eBay |
766325 Hub Kit |
13 |
OEM 391668 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
13 |
Michigan 011001 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
BRP 765182 |
Amazon |
eBay |
766325 Hub Kit |
15 |
OEM 391198 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 011002 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 061001 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
BRP 765183 |
Amazon |
eBay |
766325 Hub Kit |
17 |
OEM 391199 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 011003 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
OEM 176214 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 011024 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 061002 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
BRP 765184 |
Amazon |
eBay |
766325 Hub Kit |
19 |
OEM 390896 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 011004 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
OEM 176215 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 011025 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 061003 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
BRP 765185 |
Amazon |
eBay |
766325 Hub Kit |
21 |
OEM 389788 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 011005 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
OEM 176216 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 011026 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 061004 |
Amazon |
eBay |
14-16 foot boats, Light Loads |
Other compatible propeller options:
40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards (15 Spline)
- 90 HP V-4 1995-Newer
- 100 HP V-4 Commercial 1884-Newer
- 115 HP V-4 1995-Newer
- 130 HP V-4 1995 Newer
- 120 - 140 HP V-4 1985
- 140 HP V4 1989-1994
- 150 HP V-6 1978-Newer
- 150 HP V-6 Commercial 1993-Newer
- 155 HP V-6 Commercial 1978-Newer
- 175 HP V-6 1977-Newer
- 185 HP V-6 1984-1985
- 200 HP V-6 1976-Newer
- 225 HP V-6 1986-Newer
- 235 HP V-6 1978-1985
- 250 HP V-6 2001-Newer
- 2.6 Liter V6 1984-1985
- 250 HP V-8 1991-Newer
- 275 HP V-8 1986-1988
- 300 HP V-8 1986-1995
- 3.6 Liter V-8 1986-1987
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
OMC and Michigan Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
OMC 174926
|
Amazon |
eBay |
Cruisers and House Boats |
15 Right |
Michigan 013052
|
Amazon |
eBay |
Cruisers and House Boats |
15 Left |
OMC 174927
|
Amazon |
eBay |
Cruisers and House Boats |
15 Left |
Michigan 013051
|
Amazon |
eBay |
Cruisers and House Boats |
17 Right |
OMC 391290
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Right |
Michigan 013044
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
OMC 431930
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
Michigan 013042
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
19 Right |
OMC 389924
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Right |
Michigan 013046
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
OMC 390821
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
Michigan 013045
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
21 Right |
OMC 389923
|
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Right |
Michigan 013048 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
OMC 390822 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
Michigan 013047 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
23 Right |
OMC 389019 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
23 Right |
Michigan 013050 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
Michigan Rapture Performance Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
Michigan 013064 |
Amazon |
eBay |
Heavy Boats, House Boats |
15 Left |
Michigan 013065 |
Amazon |
eBay |
Heavy Boats, House Boats |
17 Right |
Michigan 013066 |
Amazon |
eBay |
20-26 foot, All Load, Ski |
17 Left |
Michigan 013067 |
Amazon |
eBay |
20-26 foot, All Load, Ski |
19 Right |
Michigan 013068 |
Amazon |
eBay |
18-22 foot, All Load, Ski |
19 Left |
Michigan 013069 |
Amazon |
eBay |
18-22 foot, All Load, Ski |
21 Right |
Michigan 013070 |
Amazon |
eBay |
17-19 foot, All Load, Ski |
21 Left |
Michigan 013071 |
Amazon |
eBay |
17-19 foot, All Load, Ski |
23 Right |
Michigan 013072 |
Amazon |
eBay |
15-18 foot, All Load, Ski |
23 Left |
Michigan 013073 |
Amazon |
eBay |
15-18 foot, All Load, Ski |
25 Right |
Michigan 013074 |
Amazon |
eBay |
Up to 17 foot, All Load, Ski |
25 Left |
Michigan 013075 |
Amazon |
eBay |
Up to 17 foot, All Load, Ski |
Michigan Ballistic High-Performance Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
Michigan 345031 |
Amazon |
eBay |
Cruisers, House Boats |
17 Right |
Michigan 345032 |
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
Michigan 345062 |
Amazon |
eBay |
20-26 foot, All Loads, Ski |
19 Right |
Michigan 345033 |
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
Michigan 345063 |
Amazon |
eBay |
18-22 foot, All Loads, Ski |
21 Right |
Michigan 345034 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
Michigan 345064 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
25 Right |
Michigan 345035 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
25 Left |
Michigan 345065 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
Other compatible prop options:
90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers
Stainless Steel V6 135-300 HP & 90-130 HP, 25" Shaft, 2-Stroke
- 15 Spline
- TBX Propeller Hub Kit 177283 for Evinrude/Johnson V6 Outboards Amazon eBay
-
- Note: There is also a TBX Hub Kit that makes these propellers work with Suzuki / Mercury / Honda / Yamaha V6 outboards. 177288 Amazon eBay
-
- 90 & 115 HP Evinrude® E-TEC®, 25" Shaft, 2004-thru
- 100 HP, 2004-thru
- 100 HP Commercial, 1984-thru
- 120 & 140 HP, 1985
- 130 HP, 1995-1996
- 130 HP Evinrude® E-TEC®, 2009-2010
- 135 HP, 2000-thru
- 140 HP (25"), 1989-thru
- 150 & 155 HP Commercial, 1978-thru
- 150-300 HP, Evinrude® E-TEC®, 2004-thru
- 175 HP, 1977-thru
- 185 HP, 1984-1985
- 200 HP, 1976-thru
- 225 HP, 1986-thru
- 235 HP, 1978-1985
- 2.6 liter, 1984-1985
- 250 HP, 1991-thru
- 275 HP, 1986-1988
- 300 HP, 1988-thru
- 3.6 liter, 1986-1987
- Evinrude® E-TEC® G2, 2015-thru
- Note: All V6 stainless steel propellers, fitted to Evinrude® E-TEC® G2 outboards require an additional purchase of custom fit G2 TBX™ hub kit #767683 Amazon eBay
Stainless Steel, Stern Drive 15 Spline Propellers
15 Spline
800 Series
- 3.8 - 5.7 Liter, 1978-thru
OMC Cobra®
- 4.3 - 5.7 Liter, 1986-thru
OMC Sea Drive®
- 2.0 - 4.0 Liter, 1982-thru
OMC King Cobra®
- 7.4 - 8.2 Liter, 1990-thru
BRP Evinrude Polished Stainless Steel TBX Propellers
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
11 |
BRP 763959 |
Amazon |
eBay |
15-5/8 x 11, RH, 3 Blade |
13 |
BRP 763960 |
Amazon |
eBay |
15-5/8 x 13, RH, 3 Blade |
13 |
BRP 763961 |
Amazon |
eBay |
15-5/8 x 13, LH, 3 Blade |
15 |
BRP 763962 |
Amazon |
eBay |
15 x 15, RH, 3 Blade |
15 |
BRP 763963 |
Amazon |
eBay |
15 x 15, LH, 3 Blade |
BRP Evinrude Viper TBX Stainless Steel Propellers for Runabouts and General Recreation
If you want speed, you want the Viper prop. It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed. Excellent on any recreational boat, from runabouts and cruisers to deck boats.
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
- Versatile 3-Blade performance
- Excellent balance of speed and durability
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
14 |
BRP 763910 |
Amazon |
eBay |
15 x 14, RH, 3-Blade |
14 |
BRP 763911 |
Amazon |
eBay |
15 x 14, LH, 3-Blade |
16 |
BRP 763912 |
Amazon |
eBay |
14-3/4 x 16, RH, 3-Blade |
16 |
BRP 763913 |
Amazon |
eBay |
14-3/4 x 16, LH, 3-Blade |
17 |
BRP 763914 |
Amazon |
eBay |
14-3/4 x 17, RH, 3-Blade |
17 |
BRP 763915 |
Amazon |
eBay |
14-3/4 x 17, RH, 3-Blade |
18 |
BRP 763916 |
Amazon |
eBay |
14-3/4 x 18, RH, 3-Blade |
18 |
BRP 763917 |
Amazon |
eBay |
14-3/4 x 18, LH, 3-Blade |
19 |
BRP 763918 |
Amazon |
eBay |
14-3/4 x 19, RH, 3-Blade |
19 |
BRP 763919 |
Amazon |
eBay |
14-3/4 x 19, LH, 3-Blade |
20 |
BRP 763920 |
Amazon |
eBay |
14-3/4 x 20, RH, 3-Blade |
20 |
BRP 763921 |
Amazon |
eBay |
14-3/4 x 20, LH, 3-Blade |
21 |
BRP 763922 |
Amazon |
eBay |
14-1/2 x 21, RH, 3-Blade |
21 |
BRP 763923 |
Amazon |
eBay |
14-1/2 x 21, LH, 3-Blade |
22 |
BRP 763924 |
Amazon |
eBay |
14-1/4 x 22, RH, 3-Blade |
22 |
BRP 763925 |
Amazon |
eBay |
14-1/4 x 22, LH, 3-Blade |
BRP Evinrude Cyclone TBX Stainless Steel 4-Blade for Offshore Cruising and Runabouts
When you need a prop that can hold course straight and true in all water conditions, trust the Cyclone prop to maintain compass headings and stay hooked up in big water. Designed for heavier and twin-engine boats as well as runabouts.
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
- Ultimate performance 4-blade offshore and runabout propeller
- Stays on plane with minimum RPM
- Tracks true in all water conditions
- Less vibrations and improved fuel economy
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
15 |
BRP 763936 |
Amazon |
eBay |
14-1/2 x 15, RH, 4-Blade |
15 |
BRP 763937 |
Amazon |
eBay |
14-1/2 x 15, LH, 4-Blade |
17 |
BRP 763938 |
Amazon |
eBay |
14-1/4 x 17, RH, 4-Blade |
17 |
BRP 763939 |
Amazon |
eBay |
14-1/4 x 17, LH, 4-Blade |
18 |
BRP 763940 |
Amazon |
eBay |
14-1/8 x 18, RH, 4-Blade |
18 |
BRP 763941 |
Amazon |
eBay |
14-1/8 x 18, LH, 4-Blade |
19 |
BRP 763942 |
Amazon |
eBay |
14-1/8 x 19, RH, 4-Blade |
19 |
BRP 763943 |
Amazon |
eBay |
14-1/8 x 19, RH, 4-Blade |
20 |
BRP 763944 |
Amazon |
eBay |
14 x 20, RH, 4-Blade |
20 |
BRP 763945 |
Amazon |
eBay |
14 x 20, LH, 4-Blade |
21 |
BRP 763946 |
Amazon |
eBay |
14 x 21, RH, 4-Blade |
21 |
BRP 763947 |
Amazon |
eBay |
14 x 21, LH, 4-Blade |
23 |
BRP 763948 |
Amazon |
eBay |
14 x 23, RH, 4-Blade |
23 |
BRP 763949 |
Amazon |
eBay |
14 x 23, LH, 4-Blade |
BRP Evinrude Rebel TBX Stainless Steel 3-Blade Props for Offshore Cruising
The Rebel propeller is designed and engineered to deliver improved midrange cruising and top-end performance on V6 Evinrude E-TEC. Large diameter and efficient blade contour provide faster speeds at lower RPMs to deliver significant improvement in fuel economy. You will get more miles to the gallon and a longer cruising range. Standard rotation and counter-rotation models are available from 15 to 25-inch pitch. Use the Rebel propeller on offshore boats, large runabouts, and even large pontoon boats to make them perform to their maximum potential.
- Uses TBX Interchangeable Hub
- Available in Standard RH Rotation
- Available in Counter LH Rotation
- High polish stainless steel
- Designed and engineered for efficient midrange cruising
- Improved fuel economy with a longer cruising range
- Use on offshore boats, large runabouts, and pontoon boats.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
15 |
BRP 763984 |
Amazon |
eBay |
15-3/4 x 15, RH, 3-Blade |
15 |
BRP 763985 |
Amazon |
eBay |
15-3/4 x 15, LH, 3-Blade |
17 |
BRP 763986 |
Amazon |
eBay |
15-1/2 x 17, RH, 3-Blade |
17 |
BRP 763987 |
Amazon |
eBay |
15-1/2 x 17, LH, 3-Blade |
18 |
BRP 763988 |
Amazon |
eBay |
15-3/8 x 18, RH, 3-Blade |
18 |
BRP 763989 |
Amazon |
eBay |
15-3/8 x 18, LH, 3-Blade |
19 |
BRP 763990 |
Amazon |
eBay |
15-1/4 x 19, RH, 3-Blade |
19 |
BRP 763991 |
Amazon |
eBay |
15-1/4 x 19, LH, 3-Blade |
20 |
BRP 763992 |
Amazon |
eBay |
15-1/8 x 20, RH, 3-Blade |
20 |
BRP 763993 |
Amazon |
eBay |
15-1/8 x 20, LH, 3-Blade |
21 |
BRP 763994 |
Amazon |
eBay |
15 x 21, RH, 3-Blade |
21 |
BRP 763995 |
Amazon |
eBay |
15 x 21, LH, 3-Blade |
22 |
BRP 763996 |
Amazon |
eBay |
14-7/8 x 22, RH, 3-Blade |
22 |
BRP 763997 |
Amazon |
eBay |
14-7/8 x 22, LH, 3-Blade |
23 |
BRP 763998 |
Amazon |
eBay |
14-3/4 x 23, RH, 3-Blade |
23 |
BRP 763999 |
Amazon |
eBay |
14-3/4 x 23, LH, 3-Blade |
25 |
BRP 764000 |
Amazon |
eBay |
14-1/2 x 25, RH, 3-Blade |
25 |
BRP 764001 |
Amazon |
eBay |
14-1/2 x 25, LH, 3-Blade |
BRP Evinrude Raker H.O. Propellers for Bass Boats and High Performance
Looking to plane fast - and run faster? The Raker II prop is specially designed for building up the engine RPMs and getting you on plane faster. A great prop in surfacing conditions, especially when the boat is running over 50 mph. Perfect for bass boats and high-performance boats. The Raker propeller utilizes vent holes in the outer exhaust hub to allow exhaust gases to ventilate the blade area. This allows the engine to build up RPMs and get the boat on plane faster. At higher speeds, the water from rushing past the hub blocks these vent holes, preventing. them from ventilating the blades. V6 Raker II use the TBX hub system
- Fast, Fast, Fast
- Uses the TBX hub system
- Custom cupped high rake blades provide superior bow lift and exceptional top-end speed
- Special vent holes for powerful acceleration
- Set the highest standards in top speed performance
- Maximizes the superior power and torque of Evinrude E-TEC G2 engine
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
22 |
BRP 177264 |
Amazon |
eBay |
14-1/2 x 22, RH, 3-Blade |
24 |
BRP 177265 |
Amazon |
eBay |
14-1/2 x 24, RH, 3-Blade |
24 |
BRP 177309 |
Amazon |
eBay |
14-1/2 x 24, RH, 3-Blade |
25 |
BRP 177299 |
Amazon |
eBay |
14-1/2 x 25, RH, 3-Blade |
26 |
BRP 177266 |
Amazon |
eBay |
14-1/2 x 26, RH, 3-Blade |
28 |
BRP 177267 |
Amazon |
eBay |
14-1/2 x 28, RH, 3-Blade |
Other compatible propeller options:
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, Aluminum Propellers
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers
Return to Propellers:
________________________________________________________________________________________
Evinrude/Johnson Aluminum Props
-More Performance for the Money! Evinrude/Johnson props are cast with a custom aluminum alloy to give them greater strength and longer life than ordinary propellers. Many of the Evinrude/Johnson outboards are speed cupped for better top-end performance. Special baked-on corrosion-resistant paint gives added protection against saltwater and galvanic corrosion.
- Precision casting provides greater strength and longer life
- Baked-on corrosion-resistant paint gives added protection
- Engineered to match the power curve of your outboard for superior performance.
V6 Outboard 150-300 HP & 90 - 300 HP, 25" Shaft, 2-Stroke
- 15 Spline
- TBX Propeller Hub Kit 765195 Amazon eBay for Evinrude/Johnson props with Interchangeable Hub
- Other TBX Propeller Kits available competitive brands.
-
- 90 & 115 HP Evinrude® E-TEC®, 25" Shaft, 2004-thru
- 100 HP, 2004-thru
- 100 HP Commercial, 1984-thru
- 120 & 140 HP, 1985
- 130 HP, 1995-1996
- 130 HP Evinrude® E-TEC®, 2009-2010
- 135 HP, 2000-thru
- 140 HP (25"), 1989-thru
- 150 & 155 HP Commercial, 1978-thru
- 150-300 HP, Evinrude® E-TEC®, 2004-thru
- 175 HP, 1977-thru
- 185 HP, 1984-1985
- 200 HP, 1976-thru
- 225 HP, 1986-thru
- 235 HP, 1978-1985
- 2.6 liter, 1984-1985
- 250 HP, 1991-thru
- 275 HP, 1986-1988
- 300 HP, 1988-thru
- 3.6 liter, 1986-1987
- Evinrude® E-TEC® G2, 2015-thru
V6 Stern Drive 15 Spline Propellers
15 Spline
800 Series
- 3.8 - 5.7 Liter, 1978-thru
OMC Cobra®
- 4.3 - 5.7 Liter, 1986-thru
OMC Sea Drive®
- 2.0 - 4.0 Liter, 1982-thru
OMC King Cobra®
- 7.4 - 8.2 Liter, 1990-thru
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
13 |
BRP 763453 |
Amazon |
eBay |
15-1/2 x 13, RH, 3-Blade, Rubber Hub |
15 |
BRP 765186 |
Amazon |
eBay |
15 x 15, RH, 3-Blade, Interch Hub |
17 |
BRP 765187 |
Amazon |
eBay |
14.8 x 17, RH, 3-Blade, Interch Hub |
19 |
BRP 765188 |
Amazon |
eBay |
14-1/2 x 19, RH, 3-Blade, Interch Hub |
21 |
BRP 765189 |
Amazon |
eBay |
14.3 x 21, RH, 3-Blade, Interch Hub |
23 |
BRP 763470 |
Amazon |
eBay |
14.2 x 23, RH, 3-Blade, Rubber Hub |
Other compatible propeller options:
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Aluminum Propellers
BRP Evinrude Johnson V6 150-300 HP and 90-130 HP, 25" Shaft, 2-Stroke Stainless Steel Propellers
Return to Propellers:
________________________________________________________________________________________
________________________________________________________________________________________
6211188 Starter Drive Assembly
- Fits: 9.9/15 4-Stroke, (1997 & up)
- Fits 85 thru 115 (1973-1999) Crossflow - (Sierra 18-5634, OEM 586283, 584613 Starter)
________________________________________________________________________________________
18-5697 Starter Brush and Spring Set
- Sierra Brush and Spring Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5697
- Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384
________________________________________________________________________________________
Power Trim Relay 586224 582472 584416 18-5705 Johnson Evinrude OMC
________________________________________________________________________________________
________________________________________________________________________________________
18-6780 Tilt/Trim Motor
- Fit specific, check part numbers to ensure proper fit
- Evinrude Johnson Trim/ Tilt Motor 2 Wire 4 Bolt Mount
- 90/115 Crossflow (with Fastrack Midsection)
- V6 Commercial
________________________________________________________________________________________
18-7248 Carb Kit
Note: 130 HP - P suffix only
________________________________________________________________________________________
18-4322 Powerhead Gasket Set
Gasket Set Contains:
________________________________________________________________________________________
________________________________________________________________________________________
18-2075 Marine Oil Seal
Size: 1.562, OD: 2.062, Width: 0.300
________________________________________________________________________________________
18-3866 Head Gasket
- The Sierra 18-3866 Head Gasket is interchangeable with the following: GLM 35930, Evinrude/Johnson 340115, 333549, Mallory 9-63826. Each Sierra product meets or exceeds the original equipment part it replaces.
- Sierra Head Gasket
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3866
- Interchangeable with the following: GLM 35930, Evinrude/Johnson 340115, 333549, Mallory 9-63826
________________________________________________________________________________________
18-5179 Ignition Plug In Coil
________________________________________________________________________________________
18-5772 Power Pack
- The Sierra 18-5772 Power Pack is interchangeable with the following: CDI 113-4041, Evinrude/Johnson 584041, Mallory 9-25017. Each Sierra product meets or exceeds the original equipment part it replaces.
- Sierra Power Pack
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5772
- Interchangeable with the following: CDI 113-4041, Evinrude/Johnson 584041, Mallory 9-25017
________________________________________________________________________________________
Also see: CHAMPION MARINE SPARK PLUG 5939 Marine Stainless Steel
- Evinrude Johnson 0.030 Gap
Mercury Outboards
- 125 HP 2004-1994 4-Cylinder
- 115 HP 2004-1989 4-Cylinder 2-Stroke
- 100 HP 1999-1988 4-Cylinder
- 90 HP 2006-1987 3-Cylinder 2-Stroke
- 80 HP 1989-1978
- 80 HP 2004-1995 80 Jet
- 75 HP 2006-1987 3-Cylinder 2-Stroke 2-Stroke
- 75 HP 1986-1984 4-Cylinder
- 75 HP 2001-1990 75 Sea Pro 2-Stroke
- 70 HP 1989-1987
- 65 HP 2004-1995 65 Jet
- 60 HP 2002-1991 3-Cylinder
- 60 HP 2004-1995 60 Big Foot 3-Cylinder
- 60 HP 2004-1991 60 Sea Pro 3-Cylinder
- 55 HP 2004-1992 55 Sea Pro
- 50 HP 2004-1991 50 3-Cylinder 2-Stroke 2-Stroke
- 45 HP 1989-1986
- 45 HP 2003-199 545 Jet 3-Cylinder
- 40 HP 2004-1995 2-Cylinder
- 40 HP 2004-1997 3-Cylinder
- 40 HP 1997-1988 4-Cylinder
- 40 HP 2004-1995 40 Sea Pro
- 30 HP 2003-1995 2-Cylinder 2-Stroke 2-Stroke
- 30 HP 2001-1998 30 Jet 3-Cylinder
- 30 HP 1997-1995 30 Jet 3-Cylinder
- 30 HP 2004-1995 30 Sea Pro 2-Cylinde
- 25 HP 2004-1980 2-Cylinder 2-Stroke 2-Stroke
- 25 HP 2002-1993 25 Sea Pro 2-Cylinder
- 20 HP 1981-1970
- 20 HP 2003-1986 2-Cylinder 2-Stroke
- 20 HP 2004-1995 20 Jet 2-Cylinder
- 10 HP 1996-1991
- 10 HP 2004-1991 10 Sea Pro
- 10 HP 1998 XR10
- 9.9 HP 1994-1986
- 9.8 HP 1978-1970
- 7.5 HP 1978-1970
- 4.5 HP 1985-1975
- 4 HP 1987-1986
- 4 HP 1974-1973
- 4 HP 1972
- 4 HP 1971-1970
________________________________________________________________________________________
________________________________________________________________________________________
Sierra 18-1353 Center Main Bearing
- Sierra Center Main Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1353
- Interchangeable with the following: GLM 22810, Evinrude/Johnson 5007190, 387041
________________________________________________________________________________________
18-1374 Wrist Pin Bearing
- Sierra Wrist Pin Rod
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1374
- Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217
________________________________________________________________________________________
18-1377 Center Main Bearing
- Sierra Center Main Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1377
- Interchangeable with the following: GLM 22710, Evinrude/Johnson 352960, 320499
________________________________________________________________________________________
18-1396 Marine Lower Crankshaft Bearing
________________________________________________________________________________________
18-3974 Ring Kit, Piston .030
- 18-3974 Ring Kit, Piston .030
- Johnson/Evinrude 120-300hp 88-92
- Bore Size 3.715
________________________________________________________________________________________
18-4067 Piston Kit - 3.715 (.030 Oversize Port)
- Sierra Piston
- Interchangeable with the following: GLM 24090, Evinrude/Johnson 433003, 432077, 5006673, 5006677, Mallory 9-53462, Wiseco 3019P3, 3119P3
- Loopcharged Pistons For 90 degree V4/V6/V8
________________________________________________________________________________________
18-4068 Piston Kit - .030 Oversize Starboard
- 3.715 inch (Starbord) (.030 oversize)
- Loopcharged Pistons For 90 degree V4/V6/V8
________________________________________________________________________________________
Sierra 18-1360 Rod Bearing
- Sierra Rod Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1360
- Interchangeable with the following: GLM 22850, Evinrude/Johnson 396041, Mallory 9-51104
________________________________________________________________________________________
Sierra 18-1361 Rod Crank End Bearing
- ierra Rod Crank End Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1361
- Interchangeable with the following: GLM 22820, Evinrude/Johnson 387787, Mallory 9-51100
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
Sierra 18-1376 Wrist Pin Bearing
- Sierra Wrist Pin Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1376
- Interchangeable with the following: GLM 16230, Evinrude/Johnson 434844
________________________________________________________________________________________
Sierra 18-3975 Piston Rings - 3.685 Standard Bore
- Sierra Piston Rings
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3975
- Interchangeable with the following: GLM 24250, Evinrude/Johnson 431870, Mallory 9-54432, Wiseco 3685KD
- Bore Size: 3.685
________________________________________________________________________________________
Sierra 18-4065 Piston Kit - Standard Bore Port
- Bore Size: 3.685 (port) (Standard Bore)
- Fit specific, check part numbers to ensure proper fit
- Loopcharged Pistons For 90 degree V4/V6/V8
________________________________________________________________________________________
Sierra 18-4066 Piston Kit - Standard Bore Starboard
- Sierra Piston Kit
- Bore Size: 3.685 (starboard) (Standard Bore)
- Fit specific, check part numbers to ensure proper fit
- Loopcharged Pistons For 90 degree V4/V6/V8
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
434519 Johnson Evinrude OMC Trim & Tilt O-Ring & Seal Rebuild Kit
60-300 HP 1991-2006 TNT Units
________________________________________________________________________________________
Size: 0.822, OD: 1.375, Width: 0.195
________________________________________________________________________________________
18-2062 Marine Oil Seal
Size: 0.875, OD: 1.375, Width: 0.207
________________________________________________________________________________________
18-2074 Oil Seal
Size: 1.625, OD: 2.125, Width: 0.250
________________________________________________________________________________________